ESA KEIL ARM 7 Evaluation Board for LPC 2148
- 60 MHz ARM7TDMI processor- LPC 2148 based MCU
- On-Chip Memory: 512KB Flash and 32KB RAM
- USB 2.0 Full Speed – USB Device
- 2 Serial Ports, SD Card Interface and 2 push-buttons
- Analog Voltage Control for ADC Input
- Amplifier and Speaker
- Debug Interface Connectors 20-pin JTAG (0.1 inch connector)
- Provision to work with Interfaces
ESA KEIL ARM Cortex-M3 Evaluation Board for LPC 1768
- 100MHz ARM Cortex-M3 processor- LPC 1768 based MCU in 100-pin LQFP
- On-Chip Memory: 512KB Flash and 64KB RAM
- Color QVGA TFT LCD
- 10/100 Ethernet Port
- USB 2.0 Full Speed - USB, USB-OTG, and USB Host
- 2 CAN interfaces, 2 Serial Ports, SD/MMC Card Interface, 5-position Joystick and push-button
- Analog Voltage Control for ADC Input
- Amplifier and Speaker
- Debug Interface Connectors
- 20-pin JTAG (0.1 inch connector)
- 10-pin Cortex debug (0.05 inch connector) - Provision to work with Interfaces
ESA KEIL ARM968E-S Evaluation Board for LPC 2929
- 125MHz LPC2929 ARM968E-S processor-based MCU in 144-pin LQFP
- On-Chip Memory: 768KB Flash, 56KB RAM, & 16KB EEPROM
- External Memory: 1MB SRAM
- Color QVGA TFT LCD with touch screen
- USB 2.0 Full Speed - USB, USB-OTG, & USB Host
- 2 CAN Interfaces, Serial Ports, 5-position Joystick and push-button
- MicroSD Card Interface
- Analog Voltage Control (2) for ADC Input
- 20 PIN JTAG (0.1 inch connector)
- Provision to work with Interfaces
ESA SEGGER emPower Evaluation Board
- Kinetis MK66FN2M0VMD18, 180 MHz ARM Cortex-M4 based core with DSP instructions and Single Precision Floating Point unit
- 1.8" LCD module (resolution 160x128)
- External debug interface (19-pin Cortex-M); incl. trace
- USB device: High speed, B-type connector (as on J-Link)
- 2 MB program flash memory, 256 KB RAM and 4 KB FlexRAM
- NAND Flash 1GBit
- Joystick 4(+1)-way, 3 expansion interfaces providing I2C, SPI buses, UART, GPIO/timer, analog input, power; compatible to 3.3 V SExI modules, Micro SD card connector
- Two 16-bit SAR ADCs and two 12-bit DAC
- Ethernet controller with RMII interface to external PHY and hardware IEEE 1588 capability
- USB high-/full-/low-speed On-the-Go with on-chip high speed transceiver
- USB full-/low-speed OTG with on-chip transceiver
- CAN, SPI, I2C and UART modules
- Secure Digital Host Controller (SDHC)
JTAG Debugger
- ESA SEGGER J-Link EDU Supports multiple target interfaces (JTAG, SWD)
- Supports up to 1 Mbytes/s download speed
- Supports multi-core de-bugging
- Supports an unlimited number of software breakpoints in flash memory
- Cross platform support (Microsoft Windows, Linux, Mac OS X)
- Support ARM 7/9/11, Cortex™, Microchip PIC32™, Renesas RX™ CPUs
- Supported by all major IDEs such as
- Keil MDK-ARM
- GDB-based IDEs and
- SEGGER Embedded Studio
