Artila Electronics, the leading designer and manufacturer of Linux ready ARM9 industrial PC, is an emerging force in the industrial computer field, dedicated to minimizing mass while maximizing utility. Unlike other industrial computer providers in the market who mainly use x86 plus Windows solutions, Artila focuses on ARM-core RISC CPUs with embedded Linux solutions, matched with Artila’s 10 plus years of experience in RS-232/422/485 industrial communication and TCP/IP networking. Artila’s product range consists of Serial-to-Ethernet embedded modules, ARM9/Linux box computers, and ARM9/Linux SOMs (system-on-modules).


Linux-ready ARM9 Box Computers


ATMEL 9G20, WinCE 6.0 Box Computer with 1x LAN, 4x RS-232/422/485 COM ports and 2x USB Hosts
  • WinCE 6.0 computing platform with file system
  • CPU: ATMEL AT91SAM9G20, 400MHz
  • Flash: 128MB, NAND type
  • SDRAM: 64MB
  • DataFlash: 2MB
  • Failover mechanism against system crash
  • Ethernet: 1x, 10/100Mbps
  • COM Port: 4x, RS-232/422/485
  • USB Host: 2x, USB 2.0 compliant
  • USB Client: 1x, USB 2.0 compliant
  • Power input: 9~48VDC, 300mA@12V
  • C/C++ Libraries and Run-time included
  • Supports Microsoft .NET Compact Frameworks 2.0

Linux/WinCE 6.0 ARM9 Single Board Computers


ATMEL 9G45, Linux-ready Single Board Computer with TTL/LVDS LCD interface, 1x LAN, 4x TTY ports and 4x 480Mbps USB2.0 compliant Host ports
  • Linux kernel 2.6.38 with file system
  • CPU: ATMEL AT91SAM9G45, 400MHz
  • Flash: 128MB, NAND type
  • SDRAM: 128MB
  • On-board TTL/LVDS LCD interface
  • Supports 5V/12V TFT LCD panels, upto 1280 x 860 pixels
  • Supports .NET Compact Framework 2.0
  • Ethernet: 1x, 10/100Mbps
  • TTY: 3x RS-232, 1x RS-422/485
  • USB Host: 4x, USB 2.0 compliant supports high speed mode (480Mbps)
  • micro-SD socket: upto 32GB
  • GPIO: 4x pins, CMOS-level
  • Dimension: standard 3.5″ form factor
  • Power input: 12~40VDC


Linux-ready ARM9 System on Module


Freescale i.MX537, Linux-ready 128-pin System-on-Module with 2x LVDS, 1x VGA, 1x LAN, 3x UART, 1x CAN, 1x SATA and 1x 480Mbps USB2.0 compliant Host port
  • OS: Ubuntu 10.4 with file system
  • CPU: Freescale i.MX537 (Cortex A8), 800MHz
  • Flash: 4GB, eMMC type
  • RAM: 1GB, DDR3
  • LCD interface: LVDS 2x, upto 1600 x 1200 pixels
  • VGA interface: 1x, sync. with LVDS channel 1
  • Multimedia: Full HD 1080P, OpenGLE and OpenVG
  • Ethernet interface: 1x, 10/100Mbps
  • USB Host interface: 1x, USB 2.0 compliant supports high speed mode (480Mbps)
  • SD card interface: 1x, 32GB max.
  • UART interface: 3x 921.6kbps
  • I2C interface: yes
  • I2S interface: yes, including
  • 1x transmitter and 1x receiver
  • SPI interface: yes, w/ 4x chip select signals
  • GPIO interface: 8x pins, CMOS/3.3V compatible
  • Dimensions: 80mm x 50mm
  • Power input: 80mA@3.3V
  • GNU C/C++ tool chain for Linux and Windows


Linux-ready ARM9-based Programmable Automation Controller


ATMEL 9G20, Linux-based Programmable Automation Controller with 4x 16-bit A/D inputs, 4x 2500Vrms opto-isolated digital inputs and 4x up-to-500mA high-drive digital outputs

  • Linux 2.6.29 computing platform with file system
  • CPU: ATMEL AT91SAM9G20, 400MHz
  • Flash: 128MB, NAND type
  • SDRAM: 64MB
  • micro-SD socket, upto 32GB
  • Analog input: 4x,16-bit A/D, multiplexed
  • Digital input: 4x, 2500Vrms opto-isolated
  • Digital output:4x, up-to-500mA driving current
  • Ethernet: 2x, 10/100Mbps
  • TTY: 2x RS-232, and 2x isolated RS-485
  • USB Host: 2x, USB 2.0 compliant
  • Power input: 9-40VDC
  • DIN-Rail mountable
  • GNU C/C++ tool chain for Linux and Windows

Modbus IO Modbus Gateway


Modbus/TCP Remote Digital IO Module with 16x opto-isolated digital inputs and 8x relay outputs

  • Supports both Modbus/TCP and Modbus
  • 16x isolated (2500Vrms) digital inputs
  • 8x relay outputs, 30VDC@1A or 125VAC@0.5A each relay can be set as NC or NO by jumper
  • 1x 10/100Mbps Ethernet interface
  • 1x isolated (2500Vrms) RS-485 interface
  • Supports Web-based I/O control
  • DIN-rail mounting
  • Windows configuration utility included

Serial to Ethernet Module


Two-port Serial-to-Ethernet Gateway with virtual COM support

  • Enables access to RS-232/422/485 devices through TCP/IP network
  • Ethernet port: 10/100Mbps, auto-select
  • Serial ports: 230.4Kbps baud rate port 1: RS-232/422/485 3-in-1 port 2: RS-232 only
  • Supports TCP/Server mode, TCP/Client mode, UDP mode and paired-connection mode
  • Windows Virtual COM driver included
  • Web/Telnet/Serial consoles for device configuration
  • Windows utility for device configuration and management
  • Power input: 9~15VDC; 400mA@12V
sales enquiry button