Physical Layer Switches
12 Ports 12G HD SAS Switch
With simple remote commands, you can now reconfigure your entire SAS test rack.
Product Information:
12 Ports of 12Gb SAS are operated by a cross-point switch, allowing physical layer connection and data forwarding. The switch uses simple scripted control, or can be run from the Test Monkey GUI.
![](http://www.embeddedsingapore.com/wp-content/uploads/2020/04/12-ports-12g.jpg)
40 Port 6G HD SAS Switch
With simple remote commands, you can now reconfigure your entire SAS test rack.
Product Information:
40 Ports of 6Gb SAS are operated by a cross-point switch, allowing physical layer connection and data forwarding. Operating as a full cross-point switch, any 6Gb SAS port can be connected to any other.
![](http://www.embeddedsingapore.com/wp-content/uploads/2020/04/40-ports-6g.jpg)
4/8 Port 6G SATA switch
With simple remote commands, you can now reconfigure your entire SATA test rack.
Product Information:
This SATA MUX is a physical layer switch, capable of automatically routing signals between its 4 host ports and 8 device ports.
![](http://www.embeddedsingapore.com/wp-content/uploads/2020/04/4-8-ports.jpg)
1/8 Port USB 3.0 Switch
Automate connection and hot-swap of multiple USB devices in a test system.
Product Information:
This Module is a USB Physical Layer Switch, capable of automatically routing signals between its host port and 8 device ports. With passive switching and a basic signal re-driver, the module has minimal impact on your signal.
![](http://www.embeddedsingapore.com/wp-content/uploads/2020/04/1-8-ports.jpg)