Clicker Boards™

clicker board img

Ever-Growing range of standardized add-on boards

WiFi, LoRa, BLE,GSM, GPS, OLED, Speech, Recognition, Environmental Sensors, Movement Sensors, Biosensors, LEDs, ADCs, Relays - you name it, we got it. There are hundreds of Click Boards available.

Wireless Connectivity

3G Click (EU/AUS) 3G Click (EU/AUS) 3G SARA Click 4G LTE-E Click 4G LTE-NA Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
UG95 3G UMTS/HSPA module. With SIM card slot, Audio/Mic jack, micro USB port. With UMTS/HSPA cellular modem – the u-blox U201, from the SARA series. It features the LARA-R211 multimode cellular module from u-blox. It features the LARA-R204 multimode cellular module from u-blox.

Sensors

GeoMagnetic Click IR Grid Click Moisture Click Opto Encoder Click RTD Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
Measures the geomagnetic field in three perpendicular axes. The onboard sensor uses FlipCore from Bosch. Equipped with the MLX90621BAD, a 16x4 IR array sensor, from Melexis. FDC2112 IC, a very precise 12bit capacitance to digital converter, from Texas Instruments Uses the TCUT1600X01, a tall dome dual channel transmissive optical sensor from Vishay. It is based on MAX31865 resistance to digital converter optimized for RTDs.

Interface

ATA6570 Click DALI 2 Click iButton™ Click USB UART 3 Click RS232 2 Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
Uses the ATA6570, a standalone high speed CAN transceiver IC from Microchip. It is used for interfacing with the DALI network, and as a compliant with the DALI-2 physical layer requirements Comes with Maxim’s DS1990A, a serial number iButton™ device with a unique 64-bit serial number The CP2102N, a highly integrated USB to UART interface, from Silicon Labs. The MAX3237E, a 3V to 5.5V multichannel RS232, 1 Mbit/s line driver/receiver from Texas Instruments.

Display

16x12 G Click 16x9 G Click 4Dot-Matrix R Click 4X4 RGB Click 7-SEG RGB Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
Carries a 16x12 LED display and the IS31FL3733 matrix driver with 1/12 cycle rate. With a green 16x9 LED matrix and IS31FL3731 audio modulated matrix LED driver. Displays 4 char. of 5x7 dot size. With SLO2016 module and MCP23017 I2C port expander. With a matrix of 16 WS2812 RGB LEDs a MCP1826 low dropout regulator. Carries a full color single 7 segment digit display. 16,581,375 color combinations.

Human-Machine Interface

2x2 Key Click 4x4 Key Click Button G Click Button R Click Cap Extend Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
The Click has a 4 button keypad. It allows multiple key presses and has a debounce circuit. Carries a 16 button keypad. Allows for multiple key presses at the same time. A single pushbutton - transparent, 6.8mm in diameter, with a green LED backlight. A single pushbutton - transparent, 6.8mm in diameter, with a red LED backlight. With SX8633, capacitive button touch controller. 12 pins for connecting capacitive inputs.

Storage

EEPROM Click EEPROM 2 Click EEPROM 3 Click EERAM 3.3V Click EERAM 5V Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
With 24C08WP - a highly reliable, high performance CMOS technology serial 8K EEPROM. With M95M02-DR DIP-8 socket EEPROM chip with 256 KB of memory from ST Microelectronics. With AT24CM02 DIP-8 socket EEPROM chip with 256 KB of memory from Microchip. With 47L16 EERAM, a 16Kbit SRAM with EEPROM Backup from Microchip. With 47C16 EERAM, a 16Kbit SRAM with EEPROM Back.

Miscellaneous

Opto Click RELAY Click Relay 2 Click PROTO Click FLICKER Click
UART-5V
GPIO-3.3V
PWM-SPI
AN-12C
It features two VO2630 dual channel, high speed optocoupler modules. With two G6D1AASI-5DC power PCB relay modules. Controls up to 5A, 250V AC/30V DC loads. Carries two LCA717 single-pole, OptoMOS® solid state relays. 10x11 prototyping area and additional power pads for creating custom electronics or Click boards™. TI’s NA556 dual precision timer and Omron’s G6D-ASI power PCB relay. ON/OFF 0.1-6 sec.
sales enquiry button