Flasher ARM
Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and ARM core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone.
Main features
- Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use
of PC program) - Support for ARM 7/9 and Cortex-M3
- Ethernet interface
- No power supply required, powered through USB
Flasher STM8
Flasher STM8 is a programming tool for STM8 series of flash microcontrollers.
Main features
- All STM8 devices can be programmed
- Integrated optical isolation between host and target system
- Full duplex 100Mbit Ethernet interface
- 128 MB internal flash memory to store target program
Flasher PRO is a programming tool for microcontrollers with on-chip or external Flash memory and ARM, RX or PPC core.
Flasher PRO is a programming tool for microcontrollers with on-chip or external Flash memory and ARM, RX or PPC core. Flasher PRO is designed for programming flash targets with the J-Flash software or stand-alone. Flasher PRO connects via USB, Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 or Windows 10 and has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM.
Flasher PRO—Professional Production Programmer
- Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)
- Ethernet interface
- Supports internal and external flash devices
- Wide range of devices are supported
- Free firmware updates
- 128 MB internal NAND flash, used for storing configuration and data files
- Serial in target programming supported
The handheld stand-alone Flash Programmer for on-chip and external flash memory. Flasher Portable PLUS is a battery driven programming tool for microcontrollers with on-chip and/or external flash memory. It has been designed to fill the need of an extremely portable, production grade flash programmer used for in-field firmware updates.
Flasher Portable PLUS can be powered by its internal rechargeable battery or USB. Use the integrated 1,8 inch display to review your firmware and programming status.
Initial setup/preparation for stand-alone mode operation is done via the J-Flash software, also used by other Flasher models, which requires a PC running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 or Windows 10.
Flasher Portable PLUS also supports having up to eight configurations/image files stored on the Flasher, so one unit can be used for different targets, versions or configurations. Proper image selection is done by simply clicking a button. The currently elected image is displayed.
Flasher Portable PLUS—The Mobile Flash Programmer
- Stand-alone in-circuit-programmer (Once set up, Flasher can be controlled without the use of a PC program)
- Powered by internal battery rechargeable Li-Ion 680mAh, no external power supply required
- Full insights with the new 1,8 inch display
- Up to 10 hours programming with one battery charge
- Supports having up to eight configurations/data files being stored on Flasher
- Push button allows easy selection between multiple images/configurations stored on Flasher
- 128 MB internal memory for configuration and data file storage
- Supports ARM, Cortex, PowerPC and Renesas RX cores.
- Supports internal and external flash devices
- Free updates
- Data files can be updated via mass storage or via J-Flash
- Target interface: JTAG / SWD / FINE / SPD
- Programming speed typically between 30 KB/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself
- SECURITY: Flasher Portable and Flasher Portable PLUS support Authorized Flashing. It allows to limit the number of flash programming cycles and to protect the Flasher against non-authorized access in case of external production
Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.
How it works
When you need to go for mass production, it is common to employ a contract manufacturer (CM) to mass-produce products. CMs have access to the customer's IP and enormous quantities of the components they are contracted to produce. Because of this, it is essential that customers control both their IP and limit CM production to prevent theft and secure revenue. To combat these threats, Flasher Secure uses mutual authentication, authorization, and confidentiality to secure your IP and production run. As an IP owner, you have full end-to-end control of your production chain.
End-to-End Security
Flasher Secure supports vendor-specific trusted firmware features to ensure end-to-end encryption, authentication, and confidentiality covering the whole process including the 'last mile'.
Secured Firmware
Modern products carry a huge amount of intellectual property (IP). From the IP owners point of view most of the IP is located inside the firmware. IP owners want to protect their IP. The Flasher Secure system uses authentication algorithms to make sure, that only authorized boot loaders and firmware are used in the system. If one component is not genuine, the device will stop working. Simply copying the firmware and/or bootloader from one device to another is not possible any more.
Flasher Secure—Protect The Vendors's IP
- Authenticated production with full visibility
- Production volume control
- CM administration and setup portal
- Ultra-fast programming
- Supports Cortex-M/R/A, RX, PPC
- Prevents production of counterfeit units
- No overhead in programming time
- Secure your production at contract manufacturers
Flasher 5 is a programming tool for ST9 and Renesas M16C/20, M16C/62, M16C/80, M32C, R8C, R32C, M38 and M79 series of flash microcontrollers in serial mode (1.5 MByte FLASH to store target program, remote control functions for automated testers).
Main features
- Serial (in target) programming supported
- PC program allows batch mode processing for usage in automated test systems.
- Once set up, Flasher can be controlled without the use of PC program
Flasher 5 PRO is a programming tool for Renesas M16C/62, M16C/80, M32C, M79, R32C, R8C series of microcontrollers. This tool allows programming of MCU via serial synchronous or asynchronous interface in circuit only. A target system is required.
Main features
- Serial (in target) programming supported
- 64MByte internal Flash memory to store target program
- PC program allows batch mode processing for usage in automated test systems.
- Once set up, Flasher can be controlled without the use of PC program
Flasher ST7 is a programming tool for ST7 series of flash microcontrollers.
Main features
- Small, compact housing
- Easy to use windows program
- 512 KByte internal Flash memory to store target program
The Flasher PRO XL is the extra-large memory version of SEGGER’s Flasher PRO. With all the same features of the Flasher PRO, the Flasher PRO XL expands upon the original’s 128 MB memory with 2 gigabytes—16 times as much internal flash memory. This memory can be used to store a variety of large program images. With its huge memory capacity, Flasher PRO XL can also program target systems running large footprint OSes such as Android, Linux, and Windows IoT.
Key features
- 2 Gigabytes of memory plus memory expandability
- High speed
- Large number of devices supported
- Flexible programming interface: Almost anything can be programmed
- Multiple status and control options
- Reliability
- Longevity
- Multi-platform: Includes setup and control software for Linux, macOS, and Windows
- No license required. No hidden costs. No future costs.
- Future proof: Software, firmware updates, and new flash loaders, are free of charge
Flasher Compact is an in-circuit flash programming tool, designed to program the internal and external memory of an MCU or SOC as well as program a (Q)SPI memory chip to which it is directly connected. Users control it in stand alone mode without the need of a PC program. Thanks to its compact nature and the mounting holes, integration into size-limited production setups is easier. Powered by USB, this stand-alone flash programmer has 128 MB of internal memory for storing firmware images and programming configurations.
Key features
- Compact universal stand-alone programmer
- Holes for mounting make target side assembly easy
- Includes the Flasher software package
- Includes the license to program all supported devices
- No additional licenses required. No hidden costs. No future costs.
- Future proof: Software, firmware updates, and new flash loaders, are free of charge
The Flasher ATE is an in-circuit-programmer for high-volume mass production. It is a modular system that uses a communication main board at its heart to distribute commands received from an ATE, ICT or a similar automated production handler system to the attached programming modules. Each individual programming module can be set up with individual configurations and firmware image pairs.
Key features
- In-system programmer (ISP)
- High speed programming
- Scalable solution with up to 10 individual channels
- Control interfaces for ATEs and similar production process handlers
- Switchable target power
- Functional isolation of each module
SEGGER’s Flasher Hub-12 controls up to 12 Flasher Compact units serving as individual channels for parallel, high-speed gang programming. Each channel can be configured to program a different device or a different firmware image.
The Flasher Hub-12 is set up just once per channel using SEGGER's Flasher software package. The software depends on the type of flash chip being programmed. The Hub can receive commands and send results "stand-alone" via TELNET, a desktop PC is not required for control.
Key features
- Scalability: Up to 48 individual parallel programming channels with their own circuit memory(ISP)
- Reliability
- Longevity
- Built-in web & FTP server for easy setup
- Multi-platform: Includes application software for Linux, macOS, and Windows
- No license required. No hidden costs. No future costs.
- Future proof: Software, firmware updates as well as new flash loaders are free of charge.
SEGGER's Flasher Hub-4 controls multiple Flasher Compact units serving as individual channels for parallel, high-speed gang programming. Each channel can be configured to program a different device or a different firmware image.
The Flasher Hub-4 is set up just once per channel using SEGGER's Flasher software package. The software depends on the type of flash chip being programmed. The Hub can receive commands and send results "stand-alone" via TELNET, a desktop PC is not required for control.
Using a single Flasher Hub-4 and multiple Flasher Compacts in combination with one or multiple SEGGER USB Hubs is the perfect solution for high-volume multi-panel and multi-target mass production.
Key features
- Scalability: Up to 24 individual parallel programming channels with their own circuit memory
- Reliability
- Longevity
- Built-in web & FTP server for easy setup
- Multi-platform: Includes application software for Linux, macOS, and Windows
- No license required. No hidden costs. No future costs.
- Future proof: Software, firmware updates as well as new flash loaders are free of charge.
