EV Testing? Test with the BEST! - EA Elektro-Automatik Bidirectional Regenerative Power Supplies

EV Testing Banner

ISC and EA Elektro-Automatik welcome you to this webinar on EA Elektro-Automatik's cutting-edge DC Bidirectional programmable power supplies and regenerative electronic loads that have been serving automotive applications worldwide with testing solutions for

  • Energy Storage (Batteries, Fuel Cells)
  • Vehicles (PHEV, BEV, FCEV) for ground, sea and air
  • Power Conversion (DC/DC, DC/AC, AC/DC)

This webinar will also shed more light on the exciting new launch of EA Elektro-Automatik EA-BT 20000 range of triple-output battery testers! The EA-BT 20000 battery testers can simultaneously test three batteries, thus accelerating test rates compared to instruments with a single output.

Furthermore, the webinar will discuss how the EA-PSB 10000 programmable power supply improves testing as per the German LV123 Automotive Standard.

Date 7th Sept 2023, Thursday
Time 3.30 PM - 4.30 PM IST
Planned Duration 45 minutes, followed by Q&A
Hosts Experts from EA Elektro-Automatik, Germany

All-In-One DC Power Supply with Electronic Load

EA-PSB 10000, EA-PSI 10000, EA-ELR 10000: Highest Power Density in the smallest footprint

Conventional or Bidirectional Power Supplies and Electronic Loads with Energy Recovery

  • Energy Storage (Batteries, Fuel Cells)
  • Vehicles (PHEV, BEV, FCEV) for ground, sea and air
  • Power Conversion (DC/DC, DC/AC, AC/DC)

Upto 1.92MW in a rack system

Three Channel Automated Battery Testing Solution

EA-BT 20000 Battery Tester with Triple Output

Integrated solution 2-quadrant devices for charging and discharging of battery cells, modules or packs

Regenerative: Save energy costs

  • Energy recovery with an efficiency of up to over than 96 %.
  • Significant savings of kilowatt hours
  • No conversion of energy into heat / No cost-intensive air conditioning
  • Fast amortization of the EA-BT 20000 units

Interface and control flexibility: For automated testing

  • Software EA-Power Control and EA-Battery Simulator
  • For configuration and test procedure without programming language
  • Via connection with PC or programmable logic controller (PLC)
  • Two operating modes: SCPI commands for program control from a PC/ModBus    commands for program control from a
    PLC
  • Flexible communication interfaces: Gbit Ethernet, ProfiNet, CAN-FD, or EtherCAT

Autoranging: Flexible output levels

  • Wide voltage, current and power range
  • For a wider field of operation than conventional battery testers

Safety Sense: Test Safely

  • 2nd sense input for
    • detection of wrong battery polarity
    • or detection of accidently swapped cell fixtures
  • Galvanically isolated share bus for parallel operation
  • Master-slave bus for parallel operation

Ideally Suited for Testing

Battery Packs
Battery Cells
Fuel Cells
EV Charging Systems

HV
Inverter
EV/
PHEV
On-board Chargers
HV
Fuses

Wide range of applications

For testing & simulating:

  • Battery systems for electromobility and renewable energy sources
  • Fuel cells for mobile, portable and stationary applications
  • Photovoltaics for solar energy

Automotive Test Standards

  • LV 123
  • ISO 16750-2
  • VW-80300

For More Information about our Products write to:

Phone: (65) 6295 1646,
Email ID (Sales): sales@embeddedsingapore.com
Websites: www.embeddedsingapore.com

Learn More

SECO and Gopalam Embedded Systems announce collaboration to deliver SECO solutions in the ASEAN region

Seco-Gopalam-Banner

Arezzo, Italy, August 9, 2023 – SECO and one-stop provider of hardware and software solutions for the embedded systems market Gopalam Embedded Systems Pte Ltd (GES), announce today their agreement to cooperate in the Asia-Pacific (APAC) region. SECO thus enters the ecosystem of technology leaders whose embedded solutions, tools and products are brought to the market in Singapore and the neighboring ASEAN market by GES. This cooperation will facilitate customers’ access to SECO technology while receiving highly targeted support in the selection of the most suitable solution for their project.

Gopalam Embedded Systems offers a wide range of highly integrated software and hardware development tools from leading vendors across the world, working alongside its customers through the entire development life cycle of embedded systems from design, development, debugging to verification and validation. As a reliable and trusted partner for embedded systems design and development, GES helps its customers accelerate time-to-market across various verticals like aerospace & defense, automotive, consumer electronics, education, industrial and telecommunications.

Through this cooperation, SECO now provides Gopalam Embedded Systems access to a comprehensive portfolio of embedded systems, HMIs and boxed PCs. GES will contribute with its vast experience and in-depth subject matter expertise with the design and development needs of embedded systems. Thanks to this combination, customers will be able to focus on their core business while relying on trusted tools and development solutions for their embedded project.

“We are excited to announce our collaboration with Gopalam Embedded Systems. SECO will grant GES access to our comprehensive portfolio of embedded systems, HMIs, and boxed PCs, while GES will bring their vast experience and subject matter expertise to support embedded system design and development. Together, we will provide customers with trusted tools and solutions for their projects, allowing them to focus on their core business challenges. This partnership is set to drive success across industries.” says Alessandro Hong, CEO of SECO Microelectronics, the Asia-based subsidiary of SECO S.p.A serving the APAC market.

“We are incredibly excited to announce our strategic cooperation with SECO, a renowned global leader with an impressive 40-year track record in developing embedded microcomputers, integrated systems, and IoT solutions. This collaboration further solidifies our position as a one stop solution provider for end-to-end embedded design and development tools. SECO’s wealth of experience and expertise in delivering full stack embedded platform solutions, encompassing cutting-edge hardware, software, and applications for Edge to AI development and deployment, perfectly complements our existing offerings. Together, we look forward empower our customers with an unparalleled range of innovative tools and solutions.” says Gurunatham Gopalam, CEO and Founder of Gopalam Embedded Systems.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

HD PPM 'Plus' - Major update!

HD PPM Banner

The latest update to our HD PPM range is here

The HD Programmable Power module was first released in 2016. We aim to support our products over many years and the HD is no exception.

The more advanced Power Analysis Module (PAM) range launched in 2021 and made many architectural improvements to our original power designs. Now we are announcing a major update to the HD range that will bring the benefits of the PAM, back to our older product line.

PPM Benefits

Internally called HD ‘Plus’, this is a major Firmware and FPGA update both to the QTL1999 and QTL1995 product range. I would recommend you plan an upgrade for all existing PPM units, as the benefits are significant. Local resellers can provide an eval unit to trial before committing to the upgrade.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Stay Ahead with CXL Testing and a major PPM Update

Welcome to the Summer edition of our newsletter.

--------------------------------------------------------------------------
Are you ready to test CXL? Quarch products are ready to help. If you need help then see the shows we will be visiting below, or arrange a call.

We have some exciting new products to share too: Big updates to our power range, and new Gen5 breakers.

HD Programmable Power Module Update

This significant firmware update for the QTL1999 and QTL1995 product lines is known internally as HD "Plus".

It brings long term recording at our full 4uS sampling rate and improved accuracy in lower power states.

Given the benefits, I would advise you to schedule an update for all current PPM units. The update can be applied at no extra cost, as part of a calibration cycle.


Visit Quarch and talk direct to our engineers

We will be exhibiting at PCI/SIG development PCI-SIG
Developers Conference 2023 13-14 Jun 2023 – Santa Clara, CA

As usual, we will be at the Flash Memory Summit in
Santa Clara, Flash Memory Summit 2023 8-10 Aug 2023 – Santa
Clara, CA

Visit us, chat to our engineers, and let us show you
our innovative, award-winning products. Both Quarch and other
members of the Symbiosys alliance will be present to show off
our latest solutions.


CXL> - Quarch is ready for CXL
testing, are you?

The great news is that Quarch PCIe products
are protocol agnostic and can be used to test any PCIe
compliant device.

This means you can test CXL devices
today!

If you are not sure what you should be
testing, check out our suggestions here.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Hardware & Software Development Tools for Automotive Applications

Future Mobility Asia Exhibition and Asia banner

Date 17th - 19th May, 2023
Venue Queen Sirikit National Convention Center, Booth No. MF09, Hall 2, Level G, Bangkok, Thailand
Registration (Visitor Entry Pass) https://www.future-mobility.asia/visitor-registration/
Registration (Delegate Pass) https://www.future-mobility.asia/delegateregistration/

Hardware & Software Development Tools for Automotive Applications

register blue register blue

About Future Mobility Asia - 2023:

https://www.future-mobility.asia/

Immerse yourself in the future of transportation at Asia's leading clean mobility exhibition and summit

Future Mobility Asia is a comprehensive showcase of all future clean mobility concepts, solutions, technologies and innovations.

Organised under the patronage of the Ministry of Energy Thailand, the exhibition and summit is the central meeting point for OEMs, mobility innovators, after-market suppliers and technology solution providers to meet, network and drive forward the mobility transition and transformation in Asia.

Three days of exceptional networking opportunities, insightful conferences, and more

register blue register blue

For More Information about our Products write to:

Phone: (65) 6295 1646

HP: (65) 9184 7992 or 9649 7444

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

BlackBerry QNX TECHFORUM India 2023

blackberry qnx techforum banner

TECHFORUM 2023: New solutions, latest improvements, and today’s hottest topics in the embedded software industry.

View the full agenda and secure your spot today

Date Wednesday, March 29, 2023
Place The Leela Palace Bengaluru, #23 HAL Airport Road, Bengaluru, 560008
Register Now Click here

From automotive to Industry 4.0, ‘Software-defined’ and ‘Intelligent Edge’ are used to describe innovations that are driving new technologies. But what do these terms really mean for embedded systems development teams tasked with finding innovative solutions to solve their evolving challenges?

Join us March 29ᵗʰ at the India TECHFORUM where we take a technical dive into innovative approaches in areas including:

  • bullet1 Reducing electronic hardware and costs
  • bullet1 Creating a market-differentiating user experience
  • bullet1 Facilitating new revenue models with embedded systems
  • bullet1 Employing cloud enablement and other methods for increasing development velocity
  • bullet1 Adopting functional safety and security tools and practices within your development process

register blue

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

Aukua Post on NetworkDataPedia.com

aukua banner 2

Greetings and Happy New Year to you!

A new article on how the Aukua MGA2510 can be used to identify and resolve optical Ethernet connectivity issues has been posted by Aukua's partner Tim O'Neil on his popular site NetworkDataPedia. Please check it out!

Please contact our Sales Team with any questions. We are standing by to assist!

Cheers,

view article btn

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

SerialTek logo
Panda iTAP™ Embedded PCIe Analysis

pandaitap 1

pandaitap 2

Convenient Access to Embedded PCIe Applications

The Panda appliance conveniently brings together SerialTek’s iTAP™ technology and BusXpert™ software with Broadcom PEA technology to smartly solve the problem of analyzing embedded PCIe links in ICs such as the Broadcom PEX89000 PCI Express Gen 5.0 ExpressFabric Platform. The iTAP software is a specialized “tap” framework that is fully integrated with BusXpert, the feature-rich analysis software developed for the revolutionary Kodiak™ PCIe 5.0 Protocol Analysis System.

With the increasing ubiquity of sophisticated, highly integrated systems employing switches and chip-to-chip interconnects, physical limitations to accessing PCIe traffic can prove quite challenging. With the easy access provided by the Panda appliance and SerialTek’s PCIe software packages, developers are able to quickly set up, capture, decode, and view PCIe trace data captured on-chip by Broadcom’s PCIe Embedded Analyzer (PEA) technology. When used in conjunction with the Kodiak Protocol Analysis System, developers can seamlessly transition between Kodiak’s extremely deep traces and iTAP’s embedded traces from all instances of PEA stations/ports.

For More Information about our Products write to:

Phone: (65) 6295 1646,

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Industrial Transformation logo
Industry 4.0 For Business Sustainability

GES is participating in ITAP2022 at Singapore

Date: 18th - 20th October, 2022

Venue: Visit us at Booth 2F25, Hall 2 @ Singapore Expo

itap 2022

regnw quarchbtn
For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Webinar - Everything New about Quarch Power Analysis Solutions!

winning moment

At the Flash Memory Summit 2022, Quarch Technology was recognized for its power analysis tools enabling engineers to not only characterize the power performance of storage devices from sleep states to high-intensity customer-specific workloads but even more importantly provide the information for customers to select the best drive for the job.

Gopalam Embedded Systems Pte Ltd (GES) and Quarch Technologies welcome you to this informational webinar on all the exciting and latest updates on Quarch Power Solutions.

gen5 fixture banner5

Date Thursday, August 25th, 2022
Time 2.30 PM - 3.30 PM IST
5.00 PM - 6.00 PM Singapore Time
Planned duration 45 minutes, followed by Q&A
Hosts Experts from Quarch Technology, Scotland
Register Click here

Over the past one year, Quarch has rolled out many new fixtures, updated the Power Studio, upgraded the Quarch Compliance Suite and gone on to win prestigious accolades for their highly innovative power solutions! Quarch Power Analysis solutions help SSD companies, system integrators, test labs, drive reviewers or test equipment manufacturers to gain insights into critical power and performance aspects of their systems.

regnw quarchbtn
For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Verifysoft assigns Gopalam Embedded Systems Pte Ltd. as Distributor for Singapore and South Eastern Asia

Verifysoft appointed Gopalam Embedded Systems Pte Ltd. as distributor for Testwell Tools for South Eastern Asia.

Gopalam Embedded Systems (GES) is based in Singapore and will serve our customers and prospectives in the ASEAN region (Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, the Philippines, Singapore, Thailand and Vietnam).

GES offers a wide range of highly integrated hardware and software embedded solutions from leading vendors across the world. The company supports the entire development life-cycle of embedded systems from design, development, debugging to verification and validation.
"We are excited to distribute Testwell CTC++, the leading Code Coverage Analyzer for embedded systems, in South Eastern Asia" state Mr. Gurunatham G.V. (CEO and president of GES) and Mrs. Pratibha Gopalam (Executive Director of GES). Klaus Lambertz, CEO of Verifysoft is convinced, that "GES is a perfect partner for expanding the usage of the Testwell tools in the ASEAN region".

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Webinar: The Least leveraged component of IoT. The Edge!

Mimik Banner

IoT devices are growing at an unprecedented rate and so is the data they generate. Businesses are rushing to take advantage of the benefits these connected devices offer. However, this explosive growth is placing a significant strain on traditional data infrastructure including cost, latency, privacy, and security.

In this webinar you will learn from industry experts about Hybrid Edge Cloud Computing to

  • Reduce Cloud Costs by Processing Data on the Device
  • Decrease Latency with Real-Time Data Processing
  • Provide 100% Data Privacy

sam pratibha

regnw mimikbtn1

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Quarch Automotive Multi-protocol Breaker Module

The Automotive Multi-Protocol Breaker is a versatile tool from Quarch, a standalone fault injection and monitoring device for testing critical communication links in the automotive industry and beyond.

Using simple pluggable terminal blocks, the breaker connects to a wiring loom. It can support many communication links from RS-232 to 1000Base T1 Ethernet.

multi-protocol-link

When in place, we can create physical layer interruptions from short data glitches to permanent failures. This allows our customers to prove that their links are fault-tolerant and appropriately redundant.

Power and four data lines are supported. In addition to fault injection, we can also monitor the signals in real time. Plus record them for later analysis.

Features

  • Connect into a wiring loom with a power rail and up to 4 data lines.
  • Inject physical later events and faults including hot-plug, pin-bounce, glitch, and link failure.
  • Real-time monitoring of bus transitions and capture using Power Studio or Python scripts.

Technical Specifications

  • Power rail switching: Up to 25 Volt, 8 Amp.
  • Data switching: -15V to +15V, 30mA.
  • 1 power rail, 4 data lanes, 1 ground.
  • External trigger ports for timed events.
  • Compatible with Quarch Power Studio for long-term capture of digital signals at 250KHz.
  • Power from 12v or PoE.
  • Control via USB or LAN.
For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

SANBlaze Announces Gen5 Desktop NVMe Test System

Sanblaze Banner

SANBlaze Announces Gen5 Desktop NVMe Test System

SANBlaze unveils SBExpress-DT5, a complete turnkey PCIe® Gen5 NVMe SSD validation test system that works in conjunction with our industry-leading Certified by SANBlaze automated testing, bringing Enterprise Class NVMe validation right to the developer's desktop.

Leveraging the industry leading SBExpress-RM5 Gen5 NVMe test system technology, SBExpress-DT5 is a self-contained system, quiet and portable, perfect for a work-from-home environment or traveling to customer sites or satellite offices.

The SBExpress-DT5 is the sixth generation SBExpress system and is both evolutionary, growing from its successful family of predecessors, and revolutionary with advanced test capabilities such as Vendor Defined Messaging (VDM) testing, MI over PCIe and in-band and SMBUS testing at 1MHz. All features of the enterprise test suite Certified by SANBlaze are supported by DT5 at Gen5 PCIe speed..

sbexpress DT5 Mock Up
SANBlaze SBExpress-DT5 PCI NVMe Test System

(This photo is a representation only; the final product may look slightly different)

Pair the SBExpress-DT5 with the Kodiak analyzer for even more power!

Designed to integrate seamlessly with SerialTek's Kodiak PCIe Gen5 analysis system, the SBExpress-DT5 becomes a full test, debug, and analysis platform for your Gen5 devices in a very small footprint.

dt5 kodiak

Analysis can be automated with built-in triggering when an error occurs leading to much quicker and more accurate problem resolution as described in the white paper Triggering a PCIe Analyzer from your SBExpress system.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

HSR PRP & PTP for IEC 61850 Digital Substations

Data Breach Banner

SoC-e & Relyum Solutions - From IP Cores up-to Added Value Equipment for Substation Automation

In this webinar, by SoC-e and GES, attendees will learn why PRP/HSR ethernet solutions are required for electrical substation automation and mission-critical applications that cannot tolerate any system downtime.

Webinar Agenda

  • Introduction to HSR and PRP.
  • HSR Vs PRP
  • Advantages of Hardware Based PRP
  • PTP - IEEE 1588v2 and Relevant Profiles for Substations
  • HSR and PRP with Sample Values processing
  • Implementing HSR/PRP With SoC-e’s Reconfigurable IPs
  • Value Added COTS Solutions by Relyum : RELY-PCIe, RELY-REC & RELY-TEST
Date Thursday, May 26th, 2022
Time 2:30 PM IST, 5:00 PM SGT
Speaker David Modroño Maeztu

Business Developer Engineer at SoC-e System-on-Chip engineering, S.L

Register https://register.gotowebinar.com/register/6761740747545389327

Speaker

david modrono

David Modroño Maeztu

Business Developer Engineer at SoC-e System-on-Chip engineering, S.L.

David joined SoC-e 10 years ago, in 2012. While he originally started working as an RTL developer, he quickly moved into multiple capacities. As a product manager, he is responsible for the business development of the SoC-e IP Cores business unit. He leads customer discussions, swiftly understands customer requirements, and guides them with his expertise to provide the best-fit SoC-e base solutions. He is highly appreciated for his deep knowledge and for enabling customers to succeed in their projects. He is also an active member of the product development team at SoC-e. Based on market feedback and customer interactions he helps define new product features as part of the SoC-e product roadmap.

reg greenbtn
For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More


TRACE32 supports PikeOS for MPU

sysgo lauterbach w

Jan 19, 2022 

Lauterbach, the world’s leading supplier of debug tools, and SYSGO, the leading European provider of real-time operating systems for critical embedded applications, are pleased to announce the support of SYSGO’s brand new product, PikeOS for MPU, within Lauterbach’s TRACE32 debug environment. The support includes debugging and tracing PikeOS for MPU applications as well as combined debugging of MMU and MPU based systems.

Lauterbach and SYSGO enjoy a long-standing cooperation with TRACE32 supporting PikeOS for more than 15 years. The PikeOS awareness has always provided easy access to PikeOS objects, such as partitions, tasks and threads. TRACE32 gives the user concurrent access to all partitions and tasks. Developers can view variables and set breakpoints on any task (or several of them) at any time, whether the task is currently active or not. As a result, developers using PikeOS for MPU are now able to debug their applications and systems on TRACE32 just the same way as they are used to do it with the classic PikeOS. This also includes tracing the system as a whole, covering all partitions and tasks. Using the sampled trace, TRACE32 can create comprehensive performance analysis and code coverage metrics.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales): sales@embeddedsingapore.com

Websites: www.embeddedsingapore.com

Learn More

Webinar: Jungo Co-Driver Solutions - Driver and Cabin Monitoring Systems

jungo banner

Gopalam Embedded Systems Pte Ltd (GES) and Jungo invite you to an exciting webinar on Jungo Co-Driver Solutions for Driver and Cabin Monitoring

Date: Thursday, Jan 20th, 2022
Time: 2:30 PM IST, 5:00 PM Singapore Time
Planned duration: 60 Minutes
Speaker: Opher Suhami, VP Sales and Business Development at Jungo, Israel
Register: https://register.gotowebinar.com/register/8997544863439908875

For More Information about our Products write to:
Phone: (65) 6295 1646
HP : (65) 9184 7992 or 9649 7444,
Email ID (Sales) : sales@embeddedsingapore.com

Learn More

Gopalam Embedded Systems at NXP Connects APAC 2021

Date: 16th - 17th Nov, 2021

best of class

roundtables
Visit Gopalam Embedded Systems’ Booth at NXP-Connects 2021-APAC (Virtual Online Event).

register now nxp

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

RELY-MIL-TIME-SERVER : Time Server on EU Program : GPS/PTP/NTP Time Server and Bridge

rely mil

ELY-MIL-TIME-SERVER is a MIL-STD-810G & MIL-STD-461G certified product that embeds the latest timing, networking, and security technology. This new concept of all-in-one rugged Edge computing device serves secure accurate timing distribution (PTP, NTP, GNSS), high-bandwidth and high-availability Ethernet switching and L2/L3 Cyber-security services.

The heart of this equipment is a Xilinx Ultrascale+ MPSoC device powered by SoC-e field-proven Hardware IP cores for PTP and high-availability low[1]latency Ethernet networking (10G, Time-Sensitive Networking TSN and HSR/PRP “Zero-Time Recovery” Redundancy).

Learn More

Aukua Delivers Industry's First 32G Fibre Channel and 25G Ethernet SAN Delay Emulator

aukua fibre channel

Aukua's Device is the First to Enable FC-32G End-to-End Testing of Storage Network Solutions, Disaster Recovery and Business Continuity Applications.

Aukua Systems, Inc. (https://www.aukua.com), a leading provider of precision Test and Monitoring solutions, announced the release of their Fibre Channel and Ethernet SAN Delay Emulator which is the industry's first in providing 32G Fibre Channel (FC) support. This groundbreaking solution is delivered on Aukua's XGA4250 hardware platform featuring true line-rate performance and supports a RESTful API allowing full automation capabilities.

"In recent months, we have seen an increased demand from both storage network equipment makers and organizations that are developing and deploying these new high-speed 32G FC storage networks. Our team has developed the functionality to meet that demand and we are thrilled that we were able to leverage our new XGA4250 platform to rapidly deliver this important solution to our customers within the promised timeframe," said Jason Nutt, Aukua's Co-Founder and President.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

Dediprog Trade In Program

upgrade

Dediprog Trade In Program : Save up to 50% off to upgrade your programmer NOW! Please send an email to sales@embeddedindia.com / sales@esaindia.com get an Trade-in Quote.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

TPT 17 – Meet the New Version of the Testing Tool

tpt17

TPT 17 is Now Available for Download.

The latest version of our testing tool TPT is now released. TPT 17 comes with a multitude of new features for all users across the development process of embedded systems. Testing ECUs has become faster, easier and more straightforward so you can save valuable testing time. Better test with TPT!

Watch the Release Video here:

Check out the release video of TPT17 and discover its many new features.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

Hightec Released new C/C++ Development Platform for Infineon AURIX TC4xx for Safety-relevant Applications

HighTec EDV-Systeme GmbH presents a new version of the compiler of the HighTec C/C++ Development Platform for Infineon's AURIX TC4xx. The current version 5.4.0 convinces with a complete integration of the TC4xx family, its even faster build system and the advanced code optimizations based on the architecture-specific functions of the AURIX microcontrollers. Sub-processors like HSM, GTM/MCS or PPU and other application specific architectures are also fully supported.

With the compiler update, HighTec accelerates the development and certification of safety-relevant applications, for example in industrial automation, but especially in driver assistance systems and functions for autonomous driving. HighTec is the only compiler provider to be an "Infineon Preferred Design House"; the HighTec C/C++ Development Platform is used by leading automotive manufacturers and Tier One suppliers.

The HighTec C/C++ Development Platform is a multi-architecture and multi-core compiler suite with support for TriCore, AURIX, AURIX 2G, Power Architecture (PowerPC), Arm, RISC-V and Renesas architectures. The compiler is based on the innovative LLVM open-source compiler technology developed by major IT companies; it is available for both Windows and Linux platforms. Extension with third-party Eclipse plug-ins is quite easy, as is integration into custom IDEs using the command line version.

The integrated Content Manager of the HighTec C/C++ Development Platform allows fast access to BSP (Board Support Package), integrated examples, safety libraries and driver packages such as MCAL and ILLD (Infineon Low Level Driver). Through the HighTec Library Qualification Kit, standard libraries that can be utilized without open-source license restrictions can be used for safety applications.

For the tool qualification of the C/C++ compiler according to ISO26262 ASIL D and IEC 61508 SIL 3, HighTec offers their customers a Tool Qualification Kit (Q-Kit). Numerous examples, tutorials and training documents help developers get started and work with the HighTec C/C++ Development Platform.

Version 5.4.0 of the TriCore Development Platform is now available for download. click here

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

SW version 3.11

September 8th, 2021

XJTAG 3.11 adds ARM® SWD support, user libraries, and a clock generator to boundary scan testing. These enhancements simplify the control of SWD devices when JTAG can’t be used, increase flexibility, and give you even greater convenience.

xjtag banner

Learn More

NEW Gen5 U.2 breaker / NEW SFF PAM for U.2 / NEW 2 Channel PAM / New Quarchpy

We've been busy at Quarch HQ!

NEW PCIE GEN5 PRODUCTS

8d7b73ff a5ed 3723 1243 e4b93a114e3f

2021 is a big year for Gen5 and Quarch will have multiple new products to support the early adopters. Our Gen5 U.2 Breaker has been just released, perfect for automation and debugging of the latest SFF drive. This product is in high demand.

Also released is the Gen5 PCIe x16 Slot ‘Lite’ module. This is a lower-cost product, ideal for automating power cycling. We’ve also included a standard PC USB header, allowing the module to be powered and controlled directly from the host for streamlined deployment.

sff pam

NEW SFF PAM for U.2, U.3 and SAS/SATA

New for the Power Analysis Module, the SFF fixture allows for power and sideband analysis of U.2, U.3 and SAS/SATA drives. Now you can debug sideband assertion timings and analyse power consumption via the same, easy to use the device.

"All major vendors we've spoken to this year see power testing as a key requirement. The Quarch solution provides a simple, automated way to collect the data you need"

Andy Noorie Technical Director

NEW 2-Channel mixed signal PAM fixture

5cba980b d02b 4399 ddf4 2e5ea8678e6d

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

XJTAG Case Studies

XJTAG / Boundary scan tools are essential to lower test development costs, provide excellent fault diagnostics with shorter test times. They can be used to run production level tests on the engineer’s bench for prototype boards and recover ‘dead’ boards where functional test would not work.

Find out how XJTAG solutions is helping many many customers across various domains!

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More

Altair partners with IIT Madras to add Shakti processor to its support portfolio

Altair Embed for Real-Time Simulation of Algorithms and subsequent development of production-grade Embedded Software.

Altair Embed accelerates the development of high quality, reliable firmware for Embedded control systems on popular microcontrollers such as:

  • STM32
  • TIC2000/ MSP430
  • Arduino
  • ARM-Linux Targets( RaspberryPI)
  • Host X86 PC

and now on Shakti based on RISC-V ISA!

https://lnkd.in/gi4uvh7

shakti iim

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) : sales@embeddedsingapore.com

Learn More


SEGGER emPower OS Enables On-Going Production During Chip Shortages

SEGGER introduces its all-in-one embedded operating system emPower OS. It uses proven components from the software toolbox that already lays the groundwork for many customer products and for SEGGER’s successful J-Link debugger. emPower OS provides an out-of- the-box experience for complex embedded software applications on close to one thousand hardware platforms while supporting many more.

emPowerOS ChipShortages

The emPower OS software package includes all core components (RTOS, GUI, File System) and communication software (TCP/IP, USB Device, USB-Host, Modbus), as well as IoT Toolkit, Security and Compression modules serving all the software needs of modern embedded industrial and IoT devices.

The available hardware support enables abstraction of the application from the used microcontroller being used. This means being able to quickly switch the hardware without completely rewriting the software. Software development is simplified to merely switching a few drivers, adapting the remaining direct hardware accesses and testing functionality.

This provides a solution to supply shortages on the hardware side. The redesign process could possibly be finished before the estimated arrival time of silicon vendor’s delivery.

"Because of the chip crisis, many industrial companies are rethinking their software development processes – how to break dependencies and gain flexibility,” explains SEGGER CEO Ivo Geilenbruegge. "emPower OS offers the flexibility to prevent production downtime."

he root cause of production challenges today is the chip shortage. Still, this is not the only challenge, responsible managers need to keep in mind. Other challenges are suppliers changing owners, suppliers changing license models, changing pricing or even cancelling a product, political decisions that prevent deliveries and many more. You can obtain further information on how to deal with these challenges in our risk management article at SEGGER’s blog.

emPower OS is a high-performance software platform for embedded systems and Internet of Things (IoT) devices. emPower OS is optimized for high performance and a small memory footprint. In many cases, the small memory footprint enables the use of a typical microcontroller, eliminating the need for expensive external memory, keeping the cost of the embedded computing system to a minimum.

SEGGR's embedded operating system emPower OS is offered as source code under a perpetual license model with a one-time cost without hidden follow-up costs. The customer always owns the product license. As part of the Embedded Studio PRO package, emPower OS is offered in object code.

Please find more information about emPower OS here: https://www.segger.com/products/empoweros/

Please find more about reducing risks for embedded developers here:

https://blog.segger.com/risks-are-often-underestimated-it-is-not-only-the-chip-crisis-that-threatens-embedded-manufacturers/

Learn More


XJTAG Introduces Arm® SWD Support and User-Defined Libraries

Cambridge, England, June 16, 2021 — XJTAG®, a leader in JTAG boundary scan test solutions, announces the introduction of Serial Wire Debug (SWD) support, user-defined libraries, a new clock generator, and other benefits in its latest software release, XJTAG 3.11.

Serial Wire Debug

Engineers using a device with an ARM® Cortex® core can now benefit from XJTAG’s support for the SWD protocol via any two pins of the XJLink2. As well as being used to program a device’s internal memory, this interface also allows an SWD-device to be controlled directly during a board test-for example, to provide a way to test a peripheral such as an ADC; and to program connected memories.

Although XJTAG always recommends bringing out a processor’s JTAG signals for good test coverage, if this cannot be done for some reason, this release provides a way to test the device’s connections by using SWD to control its GPIO pins.

Devices that multiplex SWD on their JTAG pins are supported by an additional function that automates switching between the two modes. With an increasing number of ICs available with an SWD interface, XJTAG believes engineers will find this support a valuable addition.

User-Defined XJEase Libraries

The new XJTAG release also introduces an application that allows engineers to create and manage their own library of XJEase device files and circuit code files. This library can also be distributed and maintained across an organisation to help drive consistency between teams, reduce the risk of duplicated effort, and minimise the time taken to maintain projects. When categorising devices or adding circuit code files to a project, this new library can be added to XJDeveloper’s list of libraries to be used.

Configurable Oscillator

Engineers looking for a way to prevent a watchdog timer from resetting the board during testing, or who need a simple clock input, will benefit from XJLink2’s new oscillator output. It comes with XJTAG 3.11 and can bring convenience and cost savings, in many instances removing the need for a separate signal generator. This flexible and easy-to-use oscillator is adjustable in 10 kHz steps from 10 kHz to 166 MHz and has a high-impedance output state when switched off. It is easy to control during a test using XJEase and runs without continuous software interaction, making it ideal when testing a board that requires a constant input. It is available on all XJLink2-based hardware, including USB, PXI and Quad versions.

Excel Support, Log File Viewer and Other Improvements

To make creating projects easier, XJTAG has responded to several engineering requests by adding support for importing BOM files in Excel format (.xls and .xlsx), including multi-tab files.

It is also now easier to deal with multiple log files. Engineers no longer need to open every file to find the ones they want because the Log File Viewer in XJTAG 3.11 enables users to filter and search a collection of log files based on their content. This allows users to filter log files to identify those where a specific test failed, or those generated at a particular time or from a specific XJPack or project version. This speeds up the process of identifying trends and debugging problems. Other additions to the Log File Viewer include the ability to preview a list of tests and results before opening the file, easier navigation through the file because the relevant section is highlighted when a test is selected in the navigation pane, and the addition of a “most recently used” list of folders.

When debugging problems with dynamic JTAG chains, it’s now easier to switch profiles on XJDeveloper’s Analyser, Debug Connection Test, and Pin Mapping screens: instead of needing to change the project’s default setting, you can now switch freely between profiles.

All the benefits that come with the 3.11 release demonstrate XJTAG’s continued commitment to maintaining its leadership in the field of boundary scan test systems. This latest software is now available for download from www.xjtag.com for existing clients with a valid maintenance contract. XJTAG can be contacted on +44 (0)1223 223007, via email at enquiries@xjtag.com,, or through its worldwide network of distributors. More information can be found at www.xjtag.com.

Learn More


Webinar : AWS 5-in-a-Box - High Quality Deep Tech Courses at Zero up-front Cost

High Quality Deep Tech Courses at Zero up-front Cost

ai ml banner

Get equipped with world-class Virtual Lab, Industry-Vetted Courseware, Faculty Development Program, jump-start AI-ML projects and pride of AWS branding

Date

Thursday, 24th June 2021

Time

3.30 PM IST

Planned duration

1 Hour + QA

Speakers

Sachin Punyani, Business Development Lead AI-ML, AWS

Vinay Chousalkar, Business Development Lead Education, AWS

Organizer and MC: Bhooshan Iyer, Vice President, ESS

Participate in the webinar to avail a trial offer

ESS & AWS are conducting an AI-ML webinar campaign to support Indian Academia through AWS 5-in-a-Box. This webinar series will help demystify & transform the way colleges teach, learn & administer cloud based AI-ML Labs with little zero upfront investments using 5-in-a-Box. This webinar is designed for all higher education institutes who are offering or plan to offer courses in AI/ML.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Aukua Systems Introduces New XGA4250 High Speed 3-in-1 Ethernet & IP Test Platform

xga4250 ethernet

Date :
31st May 2021

Aukua Systems, Inc., a leading provider of precision Ethernet & IP Test and Monitoring solutions, today announced the release of the new
XGA4250 hardware platform. This new platform complements Aukua's popular MGA2510 by extending its unique 3-in-1 testing solution to support higher speeds of 25G and beyond.

The rapid proliferation of advanced cloud-based applications in enterprise data center networks is driving the need for faster connectivity speeds than 10G which has been the dominant rate for the last few years. Since 802.3by was ratified and approved by IEEE as a standard in 2016, more organizations are adopting 25G Ethernet instead of 40G as their preferred server to top-of-rack interconnect speed as it is a newer technology with a smaller footprint and provides a clear upgrade path to 50G, 200G and beyond. In addition to data centers, 25G Ethernet is also emerging as the preferred connection technology for fronthaul and midhaul applications being deployed in mobile 5G networks replacing legacy technologies like CPRI.

"As our customers have increased the speed of their networks and products, they are demanding that we augment their test capabilities with a higher speed version of the much loved MGA2510," said Suds Rajagopal, Aukua's Co-Founder and Vice President.

Like the MGA2510, the new XGA4250 is uniquely capable of being used as a Traffic Generator & Analyzer, Inline Packet Capture, or a Network Impairment Emulatorsystem. "This flexibility is critical in enabling our customers to develop and deploy new, groundbreaking technologies like Open RAN used in 5G Wireless, Automotive Ethernet and other new high-speed interconnects," Rajagopal added.

Beta versions of the XGA4250 started shipping to select customers earlier this quarter and the product is generally available starting this week.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


New version V5 of SEGGER Embedded Studio IDE now available!

Date :
19th May 2021

Embedded Studio for ARM enables efficient development for all ARM-based devices. With support ranging from small Cortex-M microprocessors used in IoT nodes to powerful Cortex-A cores in complex systems, Embedded Studio provides you with everything required to develop your products.

  • Support for all ARM-based devices
  • Cortex-M0, Cortex-M0+, Cortex-M1
  • Cortex-M3, Cortex-M4, Cortex-M7
  • Cortex-M23, Cortex-M33
  • Cortex-A5, Cortex-A7, Cortex-A8, Cortex-A9, Cortex-A12, Cortex-A15, Cortex-A17
  • Cortex-R4, Cortex-R5, Cortex-R8
  • Legacy ARM7, ARM9, ARM11

embedded studio v5

Watch an introduction of SEGGER’s Embedded Studio IDE version 5 for Arm and how to create extremely small code for Embedded Systems.

To watch the video on YouTube, please follow this link:
youtu.be/MpqaIsLdLk4

Download:
https://www.segger.com/downloads/embedded-studio/Setup_EmbeddedStudio_ARM_v544_win_x64.exe

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Altair Embed Webinar : Develop Production-ready Embedded Firmware leveraging Model Based Development tools from ESS-Altair

altair deploy

Date : Tuesday, 11th May 2021

Time : 3.30 PM IST

Planned duration : 1 Hour + QA

Speakers : Sreeram Mohan, Vice President (Embed), Altair

Arun Prasad Bhikshesha, Senior Software Engineer, Altair

For Webinar Registration :
https://register.gotowebinar.com/register/1219340117814718732

For Registration :
https://www.embeddedindia.com/develop-deployment-ready-model-based-development-of-embedded-firmware.php

ESS & Altair invites you to an engaging & interactive webinar on Altair Model-Based Development(MBD) toolchain for Real-Time Simulation of Algorithms and subsequent development of production grade Embedded Software. Altair Embed accelerates development of high quality, reliable firmware for Embedded control systems on popular microcontrollers such as:

  • STM32
  • TIC2000/ MSP430
  • Arduino
  • ARM-Linux Targets( RaspberryPI)
  • Host X86 PC

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


THINK DIAMOND for 2-in-1 SBCs : CPU + Data acquisition on a single board.

26th April, 2021

Why buy two separate computer boards when you can get everything you need in one? A 2-in-1 SBC combines the standard CPU + system I/O of a traditional single-board computer with a full-fledged data acquisition subsystem to provide double density in the space of a single board. This helps to reduce the size and weight of your embedded system and usually provides cost savings as well.

Benefits of 2 in 1 SBCs

Benefits of 2-in-1 SBCs

  • Size and weight reduction - the single board is thinner than 2 individual boards, and the elimination of the extra PCB and bus connectors significantly reduces the weight. This is extremely valuable for mobile, robotics, and other applications.
  • Increased reliability - Elimination of extraneous connectors and bus interface components improves MTBF of the overall system.
  • Increased ruggedness - reduction in size, weight, and interconnects drives up resistance to shock and vibration.
  • Simplified purchasing and logistics - Your purchasing department only has to buy one product from one vendor, your stockroom saves space, and your assembly effort is reduced.
  • Simplified support - compatibility between the two functions (SBC + I/O) is guaranteed, and a single vendor provides all the support, simplifying and improving design-in and support efforts..

data sbc circuit

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


DediProg Launches NuProg-E2 Engineering Universal Programmer

26th April, 2021

The global market has been generally recovering from the COVID-19 pandemic that severely hit the world economy last year. The persistent stay-at-home economy results in strong demands for electronic devices, and semiconductor industry is deeply affected by the trend; since the very beginning of 2021, consumer electronics and electric vehicle manufacturers have faced a worldwide shortage of IC chips.

According to SEMI, “February billings of North America-based semiconductor equipment manufacturers once again exceeded $3 billion, powered by robust secular semiconductor demand across diverse end-use markets.” The digitization of industries worldwide continues to drive rising investments in semiconductor equipment, and also stimulate the development of all kinds of IC chips.

Meanwhile, DediProg Technology launches a new all-in-one engineering IC programmer
NuProg-E2, it supports most IC types on the market, providing a more completed and efficient solution for application engineers.
NuProg-E2 combined programming function of Nuprog-E and StarProg-U, and is compatible with ICs of different capacity: range from low capacity MCU and CPLD to high capacity Flash, eMMC and UFS, etc. Designed FPGA kernel architecture and built-in SuperSpeed® USB 3.0,
NuProg-E2 has achieved a high-speed & reliable programming performance; it’s an ideal choice for application analysis and product development.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


SeaI/O-450E : Ethernet Modbus TCP to 16 Form C Relay Outputs

ethernet modbus

26th April, 2021

The SeaI/O-450E provides 16 SPDT Form C relays. Connection to the host device is made via Ethernet 10/100BaseT connection. The SeaI/O-450E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Freely programmable 6-channel router for CAN and CAN FD

26th April, 2021

6 channel can fd
With six channels, the PCAN-Router Pro FD links the data traffic of modern CAN FD and classic CAN buses. Pluggable CAN transceiver modules allow flexible adaptation of each CAN channel to the respective requirements. In addition, the router is equipped with an analog input and four digital I/Os. The CAN messages can be recorded on the internal memory or on an inserted memory card and later read out via the USB connection. With the PCAN-Router Pro FD the data flow of test benches and production plants can be managed, monitored, and controlled. The conversion from CAN to CAN FD or vice versa enables the integration of new CAN FD applications into existing CAN 2.0 networks.

The behavior of the PCAN-Router Pro FD can be programmed freely for specific applications. The firmware is created using the included development package with GNU compiler for C and C++ and is then transferred to the module via CAN. Various programming examples, such as message forwarding or recording, facilitate the implementation of own solutions.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


PIKETEC TPT Webinar : Develop High Quality, Robust and Safe Software for Automotive and Control Systems

Industry Best Testing Strategies for MIL, SIL, PIL, HIL, Driver in Loop and much more with TPT

ESS &
PIKETEC invite you to an informative webinar on the important topic of developing
Industry Best Testing Strategies for
MIL,
SIL,
PIL,
HIL,
Driver in Loop and more with
TPT Testing Software
.

The webinar will cover topics on the Testing Strategies most suitable for ASPICE and most appropriate for the ISO 26262 verification approach which requires test objectives be met on every test level. The webinar will elaborate on addressing these standards with TPT.

automotive control system b

Date : Thursday, April 22nd, 2021

Time : 3.30 PM IST

Planned duration : 1 Hour + QA

Speakers : PIKETEC Germany

For Registration :
https://register.gotowebinar.com/register/4831358960360751115

Today, Model Based Development techniques have boosted and reinforced the software development methodologies for rapid development of high quality, feature rich, robust, and safe software for Automotive and Control Systems. The modeling techniques range from Model-in-the-Loop (MIL), Software-in-the-Loop (SIL), Processor-in-the-Loop, Hardware-in-the-Loop (HIL) to In-Vehicle/In-Plant - all through the different phases, the functional components remain the same with only the interface components changing.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Gopalam Embedded Systems (GES) offers Blackberry QNX Solutions - RTOS and more!

Blackberry QNX Solutions

Embedded Systems Solutions (ESS), a leading provider of hardware and software solutions for the embedded real-time systems market, offers BlackBerry QNX products and services, including the popular
QNX Neutrino® RTOS,
QNX OS for Safety,
QNX Platform for Instrument Clusters,
QNX Software Development Platform 7.0,
QNX Hypervisor and
QNX® SDK for Apps and Media among other QNX offerings. ESS with its technical expertise and competency in Embedded Tools, RTOS and Middleware will provide local technical and sales support to help customers build upon BlackBerry QNX’s embedded technologies.

BlackBerry QNX offers a broad range of
safety-certified and
secure software
products, complimented by world-class engineering services, to help embedded developers increase reliability, shorten time-to-market and reduce development cost.

BlackBerry QNX RTOS offers

gold standard in RTOS security
with the expertise and safety certifications to help automotive software developers build more secure products!

However, QNX is much more than an RTOS and provides hypervisor, middleware, engineering services and supplementary solutions to provide everything to build a safe, reliable and secure embedded systems.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


SEGGER Embedded Studio Available for the Renesas RE Family of MCUs

embedded studio renesas

Date :
30th March 2021

Embedded Studio is SEGGER’s cross-platform integrated development environment (IDE) for embedded systems development. The editor is quick to start up and the build process is blazingly fast, saving precious working hours. Embedded Studio contains SEGGER's own
runtime and
floating point libraries,
compilers and
linkers. All of these components were developed from the ground up specifically for resource-constrained embedded systems, are extensively used internally at SEGGER, and are continuously updated and developed. SEGGER's primary development goal is to create fast programs that can easily be tailored to the target system and require as little memory as possible.

Optimizations are made at various stages of the build process to reduce code size and improve execution speed. The
linker can make optimal use of the typically small memory of microcontrollers. Code blocks can be distributed over several memory areas and unusable memory locations can be omitted.

Embedded Studio supports all the features that characterize
J-Link and
J-Trace, such as unlimited breakpoints in flash memory or
RTT (Real Time Transfer).

For educational and non-commercial purposes, Embedded Studio can be downloaded free of charge and without registration from the SEGGER website:

https://www.segger.com/products/development-tools/embedded-studio/

There are no restrictions in terms of code size, features or duration of use.

The power efficiency of the Renesas RE Family of MCUs (including the RE01-256K), combined with the low resource usage of SEGGER software, minimizes, or sometimes even removes, the need to recharge or replace batteries. This combined efficiency could have far reaching effects; for home and building automation, smart farming, factories, a wide range of medical devices, wearable applications and more.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Webinar – Quarch Compliance Suite Mandatory for UNH-IOL NVMe Plugfest

quarch compliance suite

Date :
Thursday, 18th March 2021

Time : 2.30 PM – 3.30 PM IST

5.00 PM - 6.00 PM Singapore Time

Register:
https://register.gotowebinar.com/register/8105891504079956491

Quarch Technology Ltd, leaders in hot-plug and fault injection test automation and NVMe contributing member at UNH-IOL offers the Quarch Compliance Suite (QCS).

Quarch (
www.quarch.com) solutions are ideal for automating the testing of robustness of complex AI systems, SAN Solutions, networking and telecoms solutions, automated vehicles, aircraft and more.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Gopalam Embedded Systems (GES) offers Blackberry QNX Solutions - RTOS and more!

Blackberry QNX Solutions

Date :
Thursday, 18th March 2021

Time : 2.30 PM – 3.30 PM IST

5.00 PM - 6.00 PM Singapore Time

Embedded Systems Solutions (ESS), a leading provider of hardware and software solutions for the embedded real-time systems market, offers BlackBerry QNX products and services, including the popular
QNX Neutrino® RTOS,
QNX OS for Safety,
QNX Platform for Instrument Clusters,
QNX Software Development Platform 7.0,
QNX Hypervisor and
QNX® SDK for Apps and Media among other QNX offerings. ESS with its technical expertise and competency in Embedded Tools, RTOS and Middleware will provide local technical and sales support to help customers build upon BlackBerry QNX’s embedded technologies.

BlackBerry QNX offers a broad range of
safety-certified and
secure software
products, complimented by world-class engineering services, to help embedded developers increase reliability, shorten time-to-market and reduce development cost.

BlackBerry QNX RTOS offers

gold standard in RTOS security
with the expertise and safety certifications to help automotive software developers build more secure products!

However, QNX is much more than an RTOS and provides hypervisor, middleware, engineering services and supplementary solutions to provide everything to build a safe, reliable and secure embedded systems.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Webinar – Quarch Compliance Suite Mandatory for UNH-IOL NVMe Plugfest

quarch compliance suite

Date :
Thursday, 18th March 2021

Time : 2.30 PM – 3.30 PM IST

5.00 PM - 6.00 PM Singapore Time

Register:
https://register.gotowebinar.com/register/8105891504079956491

Quarch Technology Ltd, leaders in hot-plug and fault injection test automation and NVMe contributing member at UNH-IOL offers the Quarch Compliance Suite (QCS).

Quarch (
www.quarch.com) solutions are ideal for automating the testing of robustness of complex AI systems, SAN Solutions, networking and telecoms solutions, automated vehicles, aircraft and more.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Webinar on RTOS Simulator

mapusoft banner

Date :
Wednesday, 10th March 2021

Time : 11.00 AM India Time

Register:
https://register.gotowebinar.com/#register/6870866167274294799

Come join us for a live demonstration on how to use MapuSoft’s RTOS Simulator. There are many advantages to using a simulator. MapuSoft’s RTOS Simulator eliminates the need for expensive proprietary operating systems as well as the need to use expensive target hardware during development and testing. It allows software development and testing to begin early on inexpensive Windows or Linux host PC’s.

ESS invites you to an engaging webinar on using a simulator for embedded development. In this webinar we will be demonstrating the usage of RTOS Simulator. During this webinar, you will learn how to program on different operating systems

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


GES offers AUKUA's MGA2510 Ethernet Test Platform.

The Covid crisis necessitated remote working and remote working fueled UCaaS adoption. Assuring the quality of end-user experience (EUE) for VoIP and other UCaaS applications is an essential requirement. Understanding how VoIP apps behave under varying network conditions is a prerequisite for providing good EUE.

Aukua System’s MGA2510 Ethernet Test Platform provides a network impairment capability to do just that.

Tolly Enterprises, a leading global provider of third-party technology product validation services, found AUKUA MGA2510 simple to set up, configure and run tests. Tolly tests confirmed the need for benchmarking UCaaS/VoIP applications showing that different VoIP solutions respond differently to network impairments such as packet loss and deliver different levels of EUE.

aukua graph

Learn more about The Tolly Group findings at
https://lnkd.in/gkMtHsE

Learn More


Webinar on Comprehensive CAN(FD) & CANopen(FD) Hardware and Software Development Solutions

Webinar Banner

Date & Time:
February 17th, 2021  & 3:30 PM IST, 6.00 PM Singapore Time

Planned duration: 1 hour 30 minutes

Speakers: Holger Adamiak, Head of Design at PEAK-System, Olaf Pfeiffer, President at EmSA

Register:
https://register.gotowebinar.com/register/3506538706941888528

Embedded Systems Solutions, ESS, the leading one stop solution provider for hardware and software Embedded Solutions in India, invites to this very informative webinar about the best hardware and software tools for CAN(FD) & CANopen(FD).

PEAK-System, is a leading provider of hardware, software, and services for automotive and industrial communication with emphasis on the fieldbuses CAN and LIN. PEAK-System along with EmSA software, provide a secure way to communicate with and configure CANopen/CAN applications.

Hence PEAK-System CAN/CAN-FD solutions along with EmSA provide the most comprehensive solution for application development, simulation, analysis, monitoring and debug across all the communication layers of the CAN and CANopen.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


New SerialTek PCIe/NVMe Debug Solutions – EDSFF and PCIe Cable Interposers

SerialTek EDSSF Banner

February 05th, 2021 

Date & Time: 11 Feb 2021, Thursday, 11.00 AM (India time), 1.30 PM (Singapore time)

Planned duration: 40-45 minutes, followed by Q&A

Hosts: Electro Systems Associates, India

Speakers: Experts from SerialTek, USA

Register:
https://register.gotowebinar.com/register/6835909393782846479

This webinar will present the latest SerialTek’s, two
new SI-Fi™ interposers for EDSFF E1.S, E1.L, E3.S and for PCIe cable form factors, including OCuLink (SFF-8611), MiniSAS-HD (SFF-8674), and SlimSAS (SFF-8654). These new PCIe interposers represent an innovative approach using new modular “interposer pods”, making it easy to analyze different form factors and quickly change setups, and reduce costs.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More

Model-in-Loop Testing: Automatic Test Case Generation with TASMO
February 1st, 2021 
Generate test cases automagically

TPT is the ideal tool for automated testing of ECU software. In order to make MiL testing with TPT more efficient we have developed a particularly powerful tool for automated test case generation.

Obtaining test data for Model-in-Loop testing can be tedious. Unless you generate your test data automatically. Specifically for this purpose we have developed the tool for automatic test case generation we call TASMO.

Using TASMO saves enormous testing efforts. Once your test cases are generated you can run them over and over again.

The automatically generated test cases are suitable for back-to-back testing and therefore maintain ISO 26262 compliance

That’s all the magic!

https://lnkd.in/eeH__NW

mil testing

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Streaming Instruction Trace & Live Code Coverage/Profiling on Cortex-M Microcontrollers
January 25th, 2021 
Live Webinar - Advanced Debugging

Streaming Instruction Trace & Live Code Coverage/Profiling on Cortex-M Microcontrollers

Thu, Jan 28, 2021 9:30 PM - 10:30 PM IST

Join us at the Advanced Debugging: Streaming Trace & Live Code Coverage/Profiling on Cortex-M Microcontrollers from SEGGER.

In this Webinar, we’re going to introduce you to Streaming Instruction Trace and Live Code Coverage with SEGGER’s J-Trace PRO trace probe and the Ozone debugger. Discover:

Instruction Tracing: Capture what an embedded system really executes, non-intrusively.

Code Profiling: Measure the execution time and frequency of functions, blocks and instructions. See how Ozone makes it easy to discover optimization potential.

Code Coverage: By measuring the execution of code, J-Trace PRO and Ozone can detect unreachable code and code not covered by tests. This makes for fast, efficient code improvement.

Thu, Jan 28, 2021 9:30 PM - 10:30 PM IST you can find Axel Wolf of SEGGER giving you information on Streaming Instruction Trace & Live Code Coverage/Profiling for Cortex-M Microcontrollers.

To register for the webinar, please use
https://lnkd.in/dEsJA4B.

j trace cortex

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


SANBlaze Announces the SBExpress-DT4 NVMe Test System

November 17th, 2020 

sbexpress dt4 banner s

SANBlaze is pleased to unveil its latest system in the family of NVMe test systems, the SBExpress-DT4. This portable desk top unit packs all the same features as its big sister the SBExpress-RM4 yet rather than live permanently in a server room rack, it can be taken to a customer site or used in a work-from-home environment, and can be set up and running tests in under five minutes.

The SANBlaze SBExpress-DT4 is a complete turnkey PCIe® Gen 4 NVMe SSD validation test system. With industry leading Certified by SANBlaze automated testing, the SBExpress-DT4 brings Enterprise Class NVMe validation right to the developer's desktop. It is quiet and portable, perfect for a work-from-home environment or traveling to customer sites or satellite offices.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER embOS RTOS BSP now available for NXP i.MX RT500
September 14th, 2020 
Users of NXP's i.MX RT595-EVK may now try out the RTOS
embOS with a ready-to-run project for 
Embedded Studio. The project is provided under 
SEGGER's friendly

segger embos rtos bsp

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER J-Link adds support for Raspberry Pi as host
September 11th, 2020 
SEGGER just introduced the public availability of its J-Link software for Linux Arm. Aimed at industrial automation and other applications utilizing...

segger j link raspberry

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

NEW PRICE ANNOUNCEMENT- Jetson Nano is now available at USD 99!!
September 07, 2020 

Jetson Nano is not only a small, powerful computer for embedded applications but also AI IoT that delivers the power of modern AI in a module form factor which is now available at USD 99* (1K Units). NVIDIA Jetson Nano enables the development of millions of new small, low-power AI systems. It opens new worlds of embedded IoT applications, including entry-level Network Video Recorders (NVRs), home robots, and intelligent gateways with full analytics capabilities. At just 70 x 45 mm, the Jetson Nano module is the smallest entry level Jetson device. This production-ready System on Module (SOM) delivers big when it comes to deploying AI to devices at the edge across multiple industries. Get started fast with the comprehensive JetPack SDK with accelerated libraries for deep learning, computer vision, graphics, multimedia, and more. Jetson Nano has the performance and capabilities you need to run modern AI workloads, giving you a fast and easy way to add advanced AI to your next product.

Jetson Nano Technical Specifications
nvidia jetson nano

NVIDIA JETSON NANO MODULE

GPU 128-core Maxwell
CPU Quad-core ARM A57 @1.43GHz
Memory 4 GB 64-bit LPDDR4, 1600MHz 25.6 GB/s
Storage 16 GB eMMC 5.1
Video Encode 4K @ 30|4x 1080p @ 30|9x720p @ 30 [H.264/H.265]
Video Decode 4K @ 60|2x4K @ 30|8x 1080p @ 30|18x720p @ 30 [H.264/H.265]
CSI 12[3x4 or 4x2] lanes MIPI CSI-2 D-PHY 1.1
Connectivity Gigabit Ethernet
Display HDMI 2.0. eDP 1.4, DP 1.2[two simultaneously]
USB 1x USB 3.0, 3x USB 2.0
Others PC, PS, SPI, UART, SD/SDIO, GPIO
Mechanical 69.6 mm x 45 mm 260-pin SODIMM connector

NVIDIA JETSON – FOR THE MOST CRITICAL ROBOTIC/EMBEDDED APPLICATIONS

nvidia jetson banner

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

NVIDIA’s GPU Technology Conference (GTC)
September 01, 2020 
It is with great pleasure that we are writing to personally invite you to
NVIDIA’s GPU Technology Conference (GTC). We are taking GTC GLOBAL & ONLINE this October 5-9.


BANNER Nvidia

The first digital GTC in March was a huge success, drawing nearly 60,000 registrants. Now we’re taking GTC to a global scale and it’ll be the biggest one yet!

For the first time, GTC will run continuously, across all time zones, over five days starting October 5, 2020. This will give you a unique opportunity to interact with researchers, engineers, developers, and technologists from a variety of industries. You can exchange groundbreaking theories, share innovative approaches, and explore how AI will transform the way you work.

For India, we will be bringing live content - over 120+ global sessions and India sessions, starting from 6.30 PM IST every day through Oct 5th to 9th.

Full Day DLI Workshops are also being offered for India audiences starting at 12.30 PM from Oct 6th.

Visit Session Catalog to choose from hundreds of live & on-demand talks, instructor-led Deep Learning Institute (DLI) training, demos, podcasts, and Connect with the Experts sessions featuring live Q&A.

Early Bird pricing for a full Digital Conference Pass is available for just $49/-** through Friday, Sept. 25.

You can get an additional $10 off using my VIP code
NVROSHANG.

DLI training— which includes competency certification for many sessions—can be added to a Digital Conference Pass for just $99 per session.

You won’t want to miss this incredible, international event. If you have any questions or comments, let us know.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

No more guessing ... SEGGER´s Ozone & J-Link analyze hard faults on Cortex-M for you!
August 31, 2020 

During development of an embedded application, crashes of the firmware can happen. Illegal memory writes, access of unpowered peripherals, execution of invalid instructions, division by zero, ... in all cases the execution ends up in a HardFault handler. Then what? Ozone can help.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Aukua & KDPOF Team up for ISO Standard for Optical In-Vehicle Gigabit Connectivity
August 28, 2020 
Aukua Systems Inc., provider of Ethernet test and monitoring solutions, and KDPOF, leading supplier for gigabit transceivers over POF (Plastic Optical Fiber), are proud to announce the success of their technology partnership for ISO 21111 standardization. Recently, two additional sections, ISO 21111-3:2020 and ISO 21111-5:2020, of the international in-vehicle Ethernet ISO standard series 21111 have been published. "By providing their MGA2510 Ethernet Test and Monitoring Platform, Aukua Systems have supremely equipped the test setup for ISO certification, " stated Carlos Pardo, CEO and Co-founder of KDPOF.

For More Information about our Products write to:

HP: (65) 9184 7992 or 9649 7444,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER releases Floating-Point Library for RISC-V
August 28, 2020 

floating rsiv

SEGGER's stand-alone Floating-Point Library is now extended by an assembly-optimized variant for RISC-V.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

J-Link/ J-Trace

Debugging the dual-core NXP i.MX RT600 with the one and only SEGGER J-Link

New NXP i.MX RT600 trace example projects
August 27, 2020 

instruction trace

In order to be able to access both the Cortex-M33 and the HiFi4 DSP cores on the i.MX RT600 from two separate development environments, the J-Link software includes a ‘locking mechanism’, i.e. a mutual exclusion feature, which is illustrated in the following image:

new nxp

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Kodiak™ Next-Generation Gen4 PCIe®/NVMe™ Protocol Analysis Solution

kodiak event

August 24th, 2020 

Date & Time: 10 Sept 2020, Thursday, 9.30 AM (India time), 12.00 noon (Singapore time)

Planned duration: 40-45 minutes, followed by Q&A

Hosts: Experts from SerialTek, USA

Register:
https://www.esaindia.com/serialtek-webinar-kodiak.php

Join us for this webinar on 10 September 2020 and learn about PCIe/NVMe Analysis Platform with Embedded Hardware, Real-Time Protocol Processor™, Calibration-Free SI-Fi™ Probing and Automatic Equalization, Internal SSD Storage, Touchscreen LCD, and Standard PCIe Cabling

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Aukua MGA2510 First to Deliver Network Impairment Emulation to Booming Automotive, Defense and Aerospace Ethernet Markets

aukua mga

August 17th, 2020 
This week Aukua Systems, Inc. (“Aukua”) announced the latest release of their MGA2510, a three-in-one hardware testing solution for high-performance Ethernet networks and applications

The V3.0 release sees the MGA2510 offering a complete suite of functionality for Network Impairment Emulation, in addition to the already supported Traffic Generation, Packet Capture, and Protocol Analysis capabilities. The MGA2510’s Network Impairment Emulation functionality included in this release makes it the first device to support 2.5Gbps and 5Gbps Ethernet, and the only platform to support Automotive Ethernet now being deployed extensively in next-generation autonomous, electric and smart vehicles.

Verifying application performance under real-world delay and congestion scenarios is critical for any Ethernet deployment including Automotive, SD-WAN, Gaming, Tactical Military Networks and Enterprise-level Cloud-based and SaaS Applications. Aukua’s Network Impairment Emulators bring those real-world conditions to the lab with controllable and reproducible results leading to significant risk reduction, higher performance and more competitive solutions. Testing with Aukua is a proven way to reduce issues and inconsistencies in real-world deployments caused by varying and dynamic network conditions.

https://www.prweb.com/releases/aukua_mga2510_first_to_deliver_

network_impairment_emulation_to_booming_automotive_defense_

and_aerospace_ethernet_markets/prweb17318677.htm

https://www.aukua.com/MGA2510/networkemulator.html

For More Information about our Products write to:

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


ESS and Monsoon Announce the availability of High Voltage Power Monitor (HVPM) in India

hvpm monsoon

July 10, 2020 
ESS is pleased to announce a partnership with Monsoon Inc to introduce their high voltage power monitor(HVPM) in India. The High Voltage Power Monitor (HVPM) is a 2-in-1 fine-grained power monitoring device and benchtop power supply. Fully UL, FCC, and CE certified, it is an essential tool for engineers, software developers, testers, and quality control managers in industries spanning semiconductors, medical, automotive, sensors, app-development and robotics, who want to measure precisely how much power their devices are drawing.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
msoonsales@embeddedindia.com
Websites:
www.embeddedsingapore.com

Learn More


TRACE32 provides complete support for PikeOS 5.0

pikeos bg

June 05, 2020 
Lauterbach is pleased to announce the extension of their TRACE32® debugger to include support for SYSGO's latest release of PikeOS, version 5.0. The support contains additional features for debugging PikeOS native applications as well as APEX and POSIX guest operating systems. At the same time, even hypervised guests using PikeOS' hardware virtualization can be inspected and examined.

https://lnkd.in/gzWS5-Z

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Modular embedded solutions
May 05, 2020 
Scalable performance for the challenging situation.

Now more than ever, medical and laboratory equipment has to perform extremely well. Modular embedded solutions from TQ offer decisive advantages.

tq news b

https://lnkd.in/dVt9p8i

For More Information about our Products write to:

Phone: (65) 9184 7992 or 9649 7444

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More

New version V5 of SEGGER Embedded Studio IDE now available!
April 23, 2020 
The newly released Embedded Studio V5 for Arm processors comes with SEGGER’s Compiler, Linker, and Runtime and Floating-Point libraries.

All components are designed from the ground up for Embedded Systems and work seamlessly to generate extremely small programs.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

New release v4.9.4.0 of C/C++ compiler for TriCore
Added compiler support for the new AURIX TC3xx derivatives

April 23, 2020 

The main new features in this C/C++ compiler for TriCore, AURIX and AURIX 2G are:

  • Brand new Eclipse IDE, very comprehensive and user-friendly.
  • Support for new AURIX 2G variants, like TC32XX, TC33XX, TC35xx, TC36XX, TC37xx, TC38xx, TC39xx.
  • Board support packages for the new derivatives.
  • The HighTec IDE is updated to version 2.3.1.
  • Bugs fixed
  • Updated documentation by the compiler support for the new derivatives.

The new TriCore compiler version is available immediately for new license sales. Depending on the maintenance and support agreement, this new version is available to registered license holders as free update, available through the download

The new version is also available for evaluation.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Eclipse-based IDE for Host Porting, Abstraction, Simulation, Testing and Conversion

April 23, 2020 
Application Common Operating Environment (AppCOE™) is a framework of common architecture that promotes interoperability and cross-platform capabilities among systems and devices. It is built on the powerful open source Eclipse-based framework and integrates all of MapuSoft’s tools:
OS Changer®,
Cross-OS Development Platform,
OS Abstractor,
Ada Changer,
OS Simulator,
OS Version UpKit™,
RTOS Simulator,
Automated language conversion,
App/Platform Profiler™,
Linux OK™ Embedded C, C++ and Ada applications can be standardized on AppCOE to allow the applications to interoperate and run seamlessly on a single platform.

mapusoft appcoe

Application Common Operating Environment (AppCOE™) is a framework of common architecture that promotes interoperability and cross-platform capabilities among systems and devices. It is built on the powerful open source Eclipse-based framework and integrates all of MapuSoft’s tools: OS Changer®,Cross-OS Development Platform, OS Abstractor,.Ada Changer, OS Simulator, OS Version UpKit™,RTOS Simulator,Automated language conversion; App/Platform Profiler™;, Linux OK™ Embedded C, C++ and Ada applications can be standardized on AppCOE to allow the applications to interoperate and run seamlessly on a single platform.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Cross-platform freedom: SEGGER's J-Flash now available for macOS & Linux
April 23, 2020 
SEGGER J-Link now available on every popular operating system: Windows, macOS and Linux.

j flash

While the 
J-Link software and included command line tools have been cross-platform for years, the applications with Graphical User Interfaces (GUIs) have only been available on Windows. These have now been rewritten, one at a time to make the entire package cross-platform.

The concept and underlying platform has been proven for a long time in applications such as
SEGGER Embedded Studio
SystemView and the 
Ozone debugger and performance analyzer.

With this release the popular 
J-Flash application, which provides an easy to use interface for production flash programming and automation, is finally available not only for Windows, but also for Linux and macOS.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Software reuse on new operating system & hardware

April 23, 2020 

automated software

OS Changer® is a C/C++ source-level virtualization technology that allows you to easily re-use your software on another OS, while providing real-time performance. It eliminates the manual porting effort, saves money and shortens the time to market.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

PXROS-HR is SIL3 and ASIL D Safety Approved
OPTIMIZED RTOS FOR TRICORE, AURIX AND AURIX 2G

April 23, 2020 

pxros hr

HighTec is proud to announce that our operating system now has been officially safety approved. HighTec received the certificate confirming the fitness of PXROS-HR for safety-related applications up to SIL3 (IEC61508) and ASIL-D (ISO 26262).

The certificate includes an assessment report containing the assessment results of the certification authority, TÜV-Nord Systems GmbH & Co. KG. We are really impressed with the thorough understanding of the design principles of PXROS-HR that is shown by the report.

The SIL3/ASIL-D achievement makes our real-time operating system (RTOS) the optimal and safety approved solution for non-AUTOSAR based automotive and industrial applications, including agriculture and forestry machines/equipment.

The report summarizes them as follows:

"The main principles of HR PXROS are safety, reliability, portability and expandability. To achieve these goals, PXROS-HR relies on the following principles:

  • No Periphery of the kernel function: For instance, the time-handling of the system is done in response to a predetermined tick-signal of the application.
  • General concept of resource allocation: resources are divided into objects and dedicated for certain purposes only. Preallocation can ensure that for a certain purpose, the required resources are available (e.g. memory for sending a message).
  • Separation of the interrupt system of the microkernel: the interrupt system is not influenced by the kernel; in particular, there are no interrupt locks. The interrupt system is dedicated to the application layer.
  • No lack of resources due to excessive interrupt load:
    • System calls, which result from interrupt, do not require any resources.
    • If necessary the resources will be rearranged.
  • Freedom of interference between tasks: The address ranges of tasks can be separated completely. The communication is performed through messages only.
  • Concept of the termination of functions: This ensures the correct exception handling."

Further the report characterizes our operating system as a "Safety Element out of Context" (SEooC, this terminology is taken from ISO 26262). This means that PXROS-HR as a basis of your safety critical application has not to be assessed completely from scratch but it suffices to show that it can safely be integrated into your application context.

The benefit that you draw from the use of PXROS-HR is threefold:

  • First, you can be sure, that your safety critical real-time application is build on a sound basis.
  • Second, you can save time and money because PXROS-HR as a basis of your safety critical application need not to be assessed completely from scratch but it suffices to show that it can safely be integrated into your application context.
  • Third you can safe time and money: because of the principle "Freedom of interference" you are entitled to run those parts of your application that are not relevant to safety on the same ECU as the safety critical without the extra effort of validating the non critical parts.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Develop Once to Deploy on Multiple Platforms with Ease

April 23, 2020 

c c appl

Cross-OS Development Platform™ is a C/C++ source-level virtualization technology that provides a robust and industry standard OS interface architecture for flexible real-time application development, while allowing the user to protect the software from being locked to one OS. This negates future porting issues because the software will support multiple operating systems and versions from the beginning. It also eliminates the risk associated with the OS selection process, since the same application can be tested on multiple platforms for comparison and won’t be tied to the chosen OS.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Debug from home: SEGGER's J-Link Remote Server adds encryption
April 23, 2020 

segger j link

SEGGER's J-Link Remote Server is a proven way to debug remotely. It has been used for years to debug target systems, thousands of miles away, even behind firewalls. Of its many uses in the past, a particularly important one was for system bring-up when hardware availability was limited, expensive, or otherwise difficult. Today an even more important application has moved into focus.

Working from home has become a necessity for many of us. Given the ongoing changes in the working environment, it is very likely that some amount of work-from-home time will become not just more common but will be "the new normal".

It is not only impractical for developers to carry hardware home, with 
J-Link Remote Server it is also unnecessary. Developers can simply connect from home and use any tool that supports 
J-Link. The J-Link operates exactly the same as if it were sitting right on the developer's desk. J-Link Remote Server was first convenient, then very useful, and is now on its way to becoming indispensable.

Paired with authenticated access to the J-Link Remote Server, and the encrypted communication tunnel between software and probe, remote access is another rock-solid debug option for the J-Link based on the proven algorithms of 
emCrypt. The authentication uses challenge-response methods to ensure the password is never visible on the wire. The end-to-end encryption of the debug stream ensures that the application can be securely transferred via wire.

The J-Link Remote Server can be used at no cost with any J-Link model, including base models with only USB interface. The software is included in the "
J-Link Software and Documentation Package" that comes with every model J-Link or 
J-Trace.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER continues to strengthen its position in relation to the RISC-V instruction set architecture.
March 30, 2020 

SEGGER continues to strengthen its position in relation to the RISC-V instruction set architecture.

SEGGER announces comprehensive support for SiFive Insight debug/trace platform.

sifi

Learn More

Diamond Systems Floyd, Stevie, Elton carrier boards for Nvidia Jetson, Xavier, COM Express and more
March 27, 2020 

Diamond Systems a leading global provider for rugged, I/O-rich embedded computing solutions introduced new carrier board solutions for NVIDIA Jetson Modules and new PC/104 solutions at Embedded World 2020.

Learn More

XJAnalyser
March 27, 2020 

XJAnalyser lets you quickly find open- and short-circuit faults on your prototype. Claim one of 150 XJAnalyser test tools worth $7,900 each that XJTAG is giving away for free. Learn more at
https://bit.ly/3doWhqC

Relyum extends its TSN offer with new products
March 13, 2020 

Relyum: Aiming to offer the most complete TSN solution to its customers, Relyum has released new products and functionalities for covering all the needs of Time-Sensitive Networking.

rely mpsoc front e1584002045701

https://lnkd.in/fzju9Ws

Learn More

Diamond Systems Elton Carrier Board with Nvidia's Jetson AGX Xavier
March, 2020 

Diamond's ELTON carrier board solution for the NVIDIA Jetson AGX Xavier module is getting attention by engineers implementing high performance computing and AI applications in mobile and harsh environments.


Learn More

XJTAG Boundary Scan Delivers Great Ease-of-Use

Febraury 9th, 2020 

XJTAG®, a leader in JTAG boundary scan test solutions, announces the release of two new features that further enhance the ease-of-use of boundary scan tools. XJTAG 3.10 introduces an automated method for dealing with the situation when design updates occur on the board being tested, and a simple way to override the default settings of global variables used by XJEase Device Files.

The Board Revisions feature uses an intelligent device-matching algorithm to analyse the new netlist and identify devices that have had reference designators changed. It copies their categorisation information to the new project and automatically updates all references to them. If devices have been removed from the circuit, these are highlighted to the user. The matches and suggestions are presented in a user-friendly format that shows the reasons for the suggestions while guiding the user through the updating process. The schematic viewer, layout viewer, and netlist explorer are all utilised to provide the most user-friendly way to present the information the user needs when validating these proposed updates.

A second enhancement to XJTAG 3.10 provides a simple-to-use dialog box that allows users to override the default values of the global variables used in XJEase device files. This allows global variables to be set easily and quickly for one specific device using a method that doesn’t require coding and therefore avoids the risks associated with editing device files directly. Each device can have its own set of global variables instead of them needing to be common to all ICs that use the same device file. As an example, users of XJTAG 3.10 can set up testing so that debug data for just one specific IC is outputted, even when the board being tested uses more than one of that particular component.

Learn More

ges logo

Goplam Embedded Systems Pte Ltd.,

Joins the BlackBerry QNX Distributor

and Value-Added Integrator Program

blackberry qnx logo


GES to support design and development of secure, mission-critical embedded solutions using BlackBerry QNX technologies.


Singapore May 15, 2019

Gopalam Embedded Systems (GES), a leading provider of hardware and software development solutions for embedded real-time systems, today announced that it has joined the BlackBerry QNX Distributor and Value-Added Integrator Program, and will offer BlackBerry QNX software and services to its broad embedded customer base in the ASEAN region.
Under the agreement, GES will resell BlackBerry QNX products and services, including the popular
QNX Neutrino® RTOS,
QNX OS for Safety,
QNX OS for Medical and various other QNX offerings. This combined with its technical expertise and competency in Embedded Systems Tools, RTOS and Middleware will enable GES to build upon BlackBerry QNX’s embedded technologies, provide integration services and design, and develop safety critical solutions for GES’ customers in the ASEAN region.


Read More

Contact: Phone: (+65) - 62951646,

H/P: (+65) 9184 7992/9649 7444

Email:
sales@embeddedsingapore.com
Web:
www.embeddedsingapore.com

ges logo

Goplam Embedded Systems Pte Ltd.,

is now member of

Singapore Industrial Automation Association

siaa logo


May 6, 2019 

About Singapore Industrial Automation Association:

Incorporated since 1982, Singapore Industrial Automation Association (SIAA) is a professional association for companies and professionals in the Automation, Internet-of-Things (IoT) and Robotics sectors. To date, SIAA has about 500 active member companies and professionals, representing different industry verticals such as smart cities, buildings, logistics, retail, transportation, tourism, healthcare, and manufacturing.
SIAA plays a crucial role in galvanizing the Automation, IoT and Robotics business community, through its extensive line-up of highly-valued programs and events.

Goplam Embedded Systems Pte Ltd., is member of SIAA :
https://www.siaa.org/cos/o.x?c=/wbn/pagetree&func=view&rid=1061261
Contact: Phone: (+65) - 62951646,

H/P: (+65) 9184 7992/9649 7444

Email:
sales@embeddedsingapore.com
Web:
www.embeddedsingapore.com

ges logo

Goplam Embedded Systems Pte Ltd.,

is now member of

Singapore Semiconductor Industry Association

ssia logo


May 6, 2019 

About Singapore Semiconductor Industry Association

Singapore Semiconductor Industry Association (SSIA) is the voice of Singapore’s semiconductor industry and is committed to support this important sector in Singapore in order to facilitate substantial growth of the whole semiconductor economy of the country. SSIA brings together industry players, academia, and government agencies. Major activities focus on industry and talent outreach and continuing education, as well as to collectively address industry needs. SSIA is a platform for members to reach out to new business opportunities, industry alliances, and partners. It provides networking and relationship opportunities beyond the boundaries of Singapore. SSIA members today include companies and organizations throughout all parts of the complex and comprehensive value chain – IC design companies, Manufacturers, Fabless companies, Equipment suppliers, Photovoltaic and LED companies, EDA and material suppliers. Training and service providers, IP companies, Research institutes and Academia, as well as individual members.
Goplam Embedded Systems Pte Ltd., is member of SSIA :
https://ssia.org.sg/ssia-members/
Contact: Phone: (+65) - 62951646,

H/P: (+65) 9184 7992/9649 7444

Email:
sales@embeddedsingapore.com
Web:
www.embeddedsingapore.com

ges logo

Gopalam Embedded Systems Participating as exhibitors in

Picture1

Vietnam Industrial and Manufacturing Fair-2019
12-14 June, 2019 
BinhDuong Convention and Exhibition Center,
No 1, Le Loi Street, BinhDuong New City, BinhDuong, Vietnam

Visit our Booth # A45

Our Products on Display:

Hardware & Software Development Tools for Industrial Automation Applications



Register



Apr 24, 2019 

About VIMF 2019

With 8 successful editions to date,
Vietnam Industrial & Manufacturing Fair ( VIMF) is the ideal platform for international/ local manufacturers and suppliers to launch new products, meet targeted buyers, appoint agents and distributors, generate new business delegates & visitors, govt. authorities, industrial associations, international trade consulates, etc and establish business networks in Vietnam market. VIMF 2019 will be staging the specialized high profile event on technologies, equipment, machines & tools, systems, industry materials, and engineering services, for manufacturing, metalworking and subcontracting industries.
Vietnam Industrial & Manufacturing Fair 2019 (VIMF 2019) are the compilation of;
  • Factory Automation, Process Automation, Industrial Automation
  • Materials Handling, Automation/ Logistics Transportation
  • Equipment & Machinery, Pumps & Valves
  • Metalworking, Precision Engineering & Subcontract Manufacturing
  • Plastics Processing and Materials
  • Printing & Packaging
  • Woodworking & Furniture Manufacturing

For More Information about our Products writo:
Phone: (65) 6295 1646, Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

PEAK-System with innovations at embedded world 2019
Febrauary 14, 2019 
News EmbeddedWorld2019 Preview

PEAK-System, a company specializing in classical CAN and modern CAN FD, will present its latest products at embedded world 2019. "Like every year before, we as a German manufacturer and provider are proud to be able to prove our long-standing know-how again", so the managing director Uwe Wilhelm.
Exhibition visitors can take a look at the PCAN-MiniDiag FD, which was released at the end of January 2019, and the new PCAN-MicroMod FD product series, which will be released after the exhibition. The plug-in module PCAN-MicroMod FD, the development board PCAN-MicroMod FD Evaluation Board, and the PCAN-MicroMod FD motherboards Analog 1, Digital 1, and Digital 2 will be available. In addition, the first product of a CANopen series will be shown, which will be launched in the second half of the year.
Access to CAN FD buses via the LAN interface of a computer is to be made possible by the PCAN-Gateway FD DR at the end of 2019. A first prototype of this Linux-based module in a DIN rail housing will also be shown.
Last but not least, exhibition visitors can take a closer look at the PCAN-Router Pro FD announced for the third quarter, which is equipped with six CAN FD channels, I/Os, and data logger and can be configured with Windows software.
PEAK-System can be found at embedded world 2019 in hall 1, booth 483. The exhibition will take place from February 26th to 28th in Nuremberg, Germany. It is an important annual event for professionals from all over the world to find out about the latest embedded technologies for hardware, software, and tools.
Website of the exhibition:
www.embedded-world.de

Read More

The German company PEAK-System has published the handheld device PCAN-MiniDiag FD for the basic diagnosis and fast checking of CAN and CAN FD buses
 

quick can1

The German company PEAK-System has published the handheld device PCAN-MiniDiag FD for the basic diagnosis and fast checking of CAN and CAN FD buses. The battery-powered device has functions which show, for example, the termination, bus load, message and error counters as well as the levels at the CAN connection. In particular, for the first time, users can access any CAN network in a matter of seconds with the innovative transmission rate detection. More precisely, bit timing measurements are used to determine the nominal bit rate for CAN and the data bit rate for CAN FD.
The PCAN-MiniDiag FD can easily be operated with one hand due to its compact size and fits into any conventional trouser or jacket pocket. The device is suitable for service technicians and developers who want to quickly access unknown CAN networks in vehicles, machines, or industrial facilities and perform simple diagnostics. The PCAN-MiniDiag FD has a D-Sub connector, an OLED display, a membrane keyboard with four keys, and a housing with increased IP42 ingress protection.

Read More

Aukua delivers 3-in-1 Automotive Ethernet testing solution!
 

Aukua Systems 3-in-1 Automotive Ethernet testing solution delivers three powerful tools in one platform!

Network Impairment Emulation: see how delay, impairments and bandwidth affect automotive systems, applications and security

Inline Packet Capture and Protocol Analyzer: capture packets, monitor traffic in real-time, and troubleshoot hard to find problems

Traffic Generator: verify system integrity, throughput performance and measure system latency

Aukua is working to help Automotive semiconductor companies, Tier 1 suppliers and OEM Manufacturers leverage Automotive Ethernet so they can rapidly innovate with confidence and deliver new in-vehicle services and infortainment features, while improving safety with new advanced driver assistance systems (ADAS).

Read More

Peak-System Technik GmbH
 

can2

PEAK-SYSTEM is expanding their CAN FD product line and releasing the brand new PCAN-M.2 Four Channel card for M.2 interfaces. Thanks to the mounted expansion board on the main board, four CAN FD channels are available for computers. Each CAN FD channel can transmit a maximum of 64 data bytes of a CAN FD frame at bit rates of 20 kbit/s up to 12 Mbit/s. Each channel is also galvanically isolated up to 300 volts and can be terminated.
The card can be used on any motherboard size from Mini-ITX to E-ATX. Thus, the plug-in card is suitable for desktop and industrial PC cases of various sizes. Especially for embedded systems, such as those found in motor vehicles, railways, and aircraft, the CAN FD interface is ideal due to its size and compactness.
Device drivers are available for the operating systems Windows (10, 8.1 and 7) and Linux.
For further information, just follow this link:
https://lnkd.in/d3wEfrT

Read More

USB adapter for LIN with master/slave functionality
May 31, 2018 
pcan tools

PEAK-System launched a compact USB adapter called PLIN-USB for connecting a computer to a LIN network. The LIN adapter is intended for service technicians for diagnosis of LIN buses and for developers of vehicle networks. The adapter supports the LIN protocol according to ISO 17987 and meets all LIN specifications up to version 2.2. The LIN interface can be used in master or slave mode.
For more details write to
pcantool@embeddedindia.com

Read More

Aukua's MGA2510 is the first and only traffic generator to support Energy Efficient Ethernet (EEE) or IEEE 802.3az operation!
March 16, 2018 - June 30, 2018 

It is now possible to validate EEE operations, characterize latency and throughput performance and inject impairments for negative and functional testing all directly over a EEE enabled link.
This new feature is supported for 1000BASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T.
Please contact
aukuasales@esaindia.com or call +91-9886080011 to schedule a demo today!

PEAK System at Embedded World 2008

Uwe Wilhelm, CEO of Peak-System at Embedded World 2018 - PEAK-System PCAN-PCI/104-Express FD Four Channel

May, 2018 

Read More


WIZnet IOT CONTEST

March 16, 2018 - June 30, 2018 
wiznet iot
For Registration Visit:
www.hackster.io/contests/wiznet


Serial to Ethernet, StablE" is an international project contest for developers worldwide, powered by 
WIZnet. This contest gives developers an opportunity to showcase their skills in IoT innovation and competency.
We invite all contestants to explore WIZnet's new serial to Ethernet device, WIZ750SR. Any idea or project submission based on WIZ750SR will be accepted, because every project will enhance the functions of WIZ750SR and empower its usefulness.
For contestants, WIZnet provides the standard firmware which supports configuration of the device by Ethernet and data exchange between serial and Ethernet under plenty of options. Contestants had better use the basic software framework and add only their idea on it. Of course, they can design their own complete code from the beginning just using WIZ750SR as a HW platform. It is recommended to use any kind of sensors, actuators or any other devices additionally to differentiate your project from others.
Submit your ideas during the first phase of the contest, May 16 ~ April 20, for a chance to win a free WIZ750SR board to build your project and win cash prizes!
For Registration Visit:
www.hackster.io/contests/wiznet
For More Information about the contest, write to:
Email:
sales@embeddedindia.com
Phone: 080-6764 8888

Website:
www.embeddedindia.com;
www.esaindia.com


Tesla owners are required to have the Peak-System’s PCAN-USB adapter..


RTEmagicC PCAN USB Group 2014

Tesla owners are required to have the PCAN-USB adapter and Tesla’s Event Data Recorder (EDR) Retrieval Program to generate a PDF report outlining the findings from their electric cars’ data recorder.
Tesla is now allowing owners of its vehicles to access their cars’ Event Data Recorder (EDR), commonly known as the ‘black box’ of autos, through a set of licensed tools and software.
As noted by Tesla on its official help page for its EDR user guide, all of the company’s vehicles save for the original Roadster are equipped with an Event Data Recorder. The recording devices are only activated once the vehicle senses a non-trivial physical occurrence in the vehicle. Thus, during normal driving conditions, the EDR is deactivated.
In the event that data logs from the EDR need to be accessed, however, Tesla’s new set of proprietary tools and software can retrieve data from the vehicle’s black box. The following hardware is required to gain access to the data to the Model S, X, and 3’s EDR.
  • A Windows computer (Mac OSX and Linux are not supported)
  • A PCAN-USB, which is a USB-to-CAN adapter manufactured by Peak System
  • The appropriate Tesla Model S, X, or 3 cable from the EDR Retrieval Hardware Kit

Read More

ges logo1
logo solid altair cropped

Participating as exhibitors in

INTERNATIONAL EXHIBITION & CONFERENCE ON THE INTERNET OF THINGS
iotasia

Visit our Booth # A37, Singapore Expo (Hall 3) 1 Expo Drive, Singapore 486150



Register

Goplam Embedded Systems, along with partners SolidThinking, an Altair company, are participating in the IoT Asia 2018. SolidThinking products ‘EMBED, ACTIVATE, COMPOSE’ will be showcased and demonstrated. For more details on the products on display, visit



www.embeddedsingapore.com/products/model-based-system-design/solidthinking



mbd.altair.com/

IoT Asia’s aim is to provide a neutral platform for technology influencers to discuss the latest trends and challenges within the industry. For the past 4 years, IoT Asia has been at the forefront of bringing global collaboration and partnership opportunities to governments, businesses and communities in Asia. IoT Asia is an award winning stage that brings together technology heads, design architects, solution architects, engineers, academic institutions, investors and start-ups to assess the latest trends and partnership models in Asia. Featuring a 6,000 sqm exhibition, multi-track thought provoking conferences and community-driven seminars, IoT Asia 2018 will put the spotlight on the following key areas critical to the development of IoT in Asia: Smart Cities, Industrial IoT, IoT Data Analytics, Enablers.
For more information about SolidThinking products contact:


Gopalam Embedded Systems Pte Ltd,
Phone: (65) 6295 1646, HP: (65) 9184 7992 or 9649 7444
Email ID (Sales):
sales@embeddedsingapore.com
Email ID (Support):
support@embeddedsingapore.com

Read More

Webinar on Verifying RTOS Applications using Deep Insight Analysis-Sept 27th

WEBINAR with Jacob Beningo
Time-to-market and reliable products - sounds like contradictive requirements. You can master both by applying the right tools and techniques. Very much dependent on the right concept - selecting the right RTOS and the use of capable tools - keeps you focusing on your application.

GES announces its partnership with Artila. ESS aspires to add force to Artila’s mission to empower device manufactures and system integrators to realize pervasive computing by providing quality products to help our customers incorporate Ethernet connectivity, Web services and embedded computing into their products and solutions, in Singapore, Malaysia and other ASEAN regions.

Read More

GES announces its partnership with MicroMax Computer Intelligence. MicroMax is an engineering company, designing specialized computer systems for mission critical applications, with a client base that includes the transportation industry (rail, marine and air), various industrial and manufacturing enterprises as well as financial and federal and municipal agencies. MicroMax systems are excellent for harsh scenarios such as train or marine use, limited-sheltered outdoor applications in heat and cold, and tough industrial environments with dust, dirt, and other contaminants. With this partnership GES hopes to serve customers build rugged customizable industrial systems for tough environment, in Singapore, Malaysia and other ASEAN regions.

Read More


Webinar on RTOS Simulator

Date :
Wednesday, 10th March 2021

Time : 11.00 AM India Time

Register:
https://register.gotowebinar.com/#register/6870866167274294799

Come join us for a live demonstration on how to use MapuSoft’s RTOS Simulator. There are many advantages to using a simulator. MapuSoft’s RTOS Simulator eliminates the need for expensive proprietary operating systems as well as the need to use expensive target hardware during development and testing. It allows software development and testing to begin early on inexpensive Windows or Linux host PC’s.

ESS invites you to an engaging webinar on using a simulator for embedded development. In this webinar we will be demonstrating the usage of RTOS Simulator. During this webinar, you will learn how to program on different operating systems

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


GES offers AUKUA's MGA2510 Ethernet Test Platform.

The Covid crisis necessitated remote working and remote working fueled UCaaS adoption. Assuring the quality of end-user experience (EUE) for VoIP and other UCaaS applications is an essential requirement. Understanding how VoIP apps behave under varying network conditions is a prerequisite for providing good EUE.

Aukua System’s MGA2510 Ethernet Test Platform provides a network impairment capability to do just that.

Tolly Enterprises, a leading global provider of third-party technology product validation services, found AUKUA MGA2510 simple to set up, configure and run tests. Tolly tests confirmed the need for benchmarking UCaaS/VoIP applications showing that different VoIP solutions respond differently to network impairments such as packet loss and deliver different levels of EUE.

Learn more about The Tolly Group findings at
https://lnkd.in/gkMtHsE

Learn More


Webinar on Comprehensive CAN(FD) & CANopen(FD) Hardware and Software Development Solutions

Webinar Banner

Date & Time:
February 17th, 2021  & 3:30 PM IST, 6.00 PM Singapore Time

Planned duration: 1 hour 30 minutes

Speakers: Holger Adamiak, Head of Design at PEAK-System, Olaf Pfeiffer, President at EmSA

Register:
https://register.gotowebinar.com/register/3506538706941888528

Embedded Systems Solutions, ESS, the leading one stop solution provider for hardware and software Embedded Solutions in India, invites to this very informative webinar about the best hardware and software tools for CAN(FD) & CANopen(FD).

PEAK-System, is a leading provider of hardware, software, and services for automotive and industrial communication with emphasis on the fieldbuses CAN and LIN. PEAK-System along with EmSA software, provide a secure way to communicate with and configure CANopen/CAN applications.

Hence PEAK-System CAN/CAN-FD solutions along with EmSA provide the most comprehensive solution for application development, simulation, analysis, monitoring and debug across all the communication layers of the CAN and CANopen.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


New SerialTek PCIe/NVMe Debug Solutions – EDSFF and PCIe Cable Interposers

SerialTek EDSSF Banner

February 05th, 2021 

Date & Time: 11 Feb 2021, Thursday, 11.00 AM (India time), 1.30 PM (Singapore time)

Planned duration: 40-45 minutes, followed by Q&A

Hosts: Electro Systems Associates, India

Speakers: Experts from SerialTek, USA

Register:
https://register.gotowebinar.com/register/6835909393782846479

This webinar will present the latest SerialTek’s, two
new SI-Fi™ interposers for EDSFF E1.S, E1.L, E3.S and for PCIe cable form factors, including OCuLink (SFF-8611), MiniSAS-HD (SFF-8674), and SlimSAS (SFF-8654). These new PCIe interposers represent an innovative approach using new modular “interposer pods”, making it easy to analyze different form factors and quickly change setups, and reduce costs.

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More

Model-in-Loop Testing: Automatic Test Case Generation with TASMO
February 1st, 2021 
Generate test cases automagically

TPT is the ideal tool for automated testing of ECU software. In order to make MiL testing with TPT more efficient we have developed a particularly powerful tool for automated test case generation.

Obtaining test data for Model-in-Loop testing can be tedious. Unless you generate your test data automatically. Specifically for this purpose we have developed the tool for automatic test case generation we call TASMO.

Using TASMO saves enormous testing efforts. Once your test cases are generated you can run them over and over again.

The automatically generated test cases are suitable for back-to-back testing and therefore maintain ISO 26262 compliance

That’s all the magic!

https://lnkd.in/eeH__NW

mil testing

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Streaming Instruction Trace & Live Code Coverage/Profiling on Cortex-M Microcontrollers
January 25th, 2021 
Live Webinar - Advanced Debugging

Streaming Instruction Trace & Live Code Coverage/Profiling on Cortex-M Microcontrollers

Thu, Jan 28, 2021 9:30 PM - 10:30 PM IST

Join us at the Advanced Debugging: Streaming Trace & Live Code Coverage/Profiling on Cortex-M Microcontrollers from SEGGER.

In this Webinar, we’re going to introduce you to Streaming Instruction Trace and Live Code Coverage with SEGGER’s J-Trace PRO trace probe and the Ozone debugger. Discover:

Instruction Tracing: Capture what an embedded system really executes, non-intrusively.

Code Profiling: Measure the execution time and frequency of functions, blocks and instructions. See how Ozone makes it easy to discover optimization potential.

Code Coverage: By measuring the execution of code, J-Trace PRO and Ozone can detect unreachable code and code not covered by tests. This makes for fast, efficient code improvement.

Thu, Jan 28, 2021 9:30 PM - 10:30 PM IST you can find Axel Wolf of SEGGER giving you information on Streaming Instruction Trace & Live Code Coverage/Profiling for Cortex-M Microcontrollers.

To register for the webinar, please use
https://lnkd.in/dEsJA4B.

j trace cortex

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER embOS RTOS BSP now available for NXP i.MX RT500
September 14th, 2020 
Users of NXP's i.MX RT595-EVK may now try out the RTOS
embOS with a ready-to-run project for 
Embedded Studio. The project is provided under 
SEGGER's friendly

segger embos rtos bsp

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER J-Link adds support for Raspberry Pi as host
September 11th, 2020 
SEGGER just introduced the public availability of its J-Link software for Linux Arm. Aimed at industrial automation and other applications utilizing...

segger j link raspberry 1

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

NEW PRICE ANNOUNCEMENT- Jetson Nano is now available at USD 99!!
September 07, 2020 

nvidia jetson banner

Jetson Nano is not only a small, powerful computer for embedded applications but also AI IoT that delivers the power of modern AI in a module form factor which is now available at USD 99* (1K Units). NVIDIA Jetson Nano enables the development of millions of new small, low-power AI systems. It opens new worlds of embedded IoT applications, including entry-level Network Video Recorders (NVRs), home robots, and intelligent gateways with full analytics capabilities. At just 70 x 45 mm, the Jetson Nano module is the smallest entry level Jetson device. This production-ready System on Module (SOM) delivers big when it comes to deploying AI to devices at the edge across multiple industries. Get started fast with the comprehensive JetPack SDK with accelerated libraries for deep learning, computer vision, graphics, multimedia, and more. Jetson Nano has the performance and capabilities you need to run modern AI workloads, giving you a fast and easy way to add advanced AI to your next product.

Jetson Nano Technical Specifications
nvidia jetson nano

NVIDIA JETSON NANO MODULE

GPU 128-core Maxwell
CPU Quad-core ARM A57 @1.43GHz
Memory 4 GB 64-bit LPDDR4, 1600MHz 25.6 GB/s
Storage 16 GB eMMC 5.1
Video Encode 4K @ 30|4x 1080p @ 30|9x720p @ 30 [H.264/H.265]
Video Decode 4K @ 60|2x4K @ 30|8x 1080p @ 30|18x720p @ 30 [H.264/H.265]
CSI 12[3x4 or 4x2] lanes MIPI CSI-2 D-PHY 1.1
Connectivity Gigabit Ethernet
Display HDMI 2.0. eDP 1.4, DP 1.2[two simultaneously]
USB 1x USB 3.0, 3x USB 2.0
Others PC, PS, SPI, UART, SD/SDIO, GPIO
Mechanical 69.6 mm x 45 mm 260-pin SODIMM connector

NVIDIA JETSON – FOR THE MOST CRITICAL ROBOTIC/EMBEDDED APPLICATIONS

nvidia jetson banner2

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

NVIDIA’s GPU Technology Conference (GTC)
September 01, 2020 
It is with great pleasure that we are writing to personally invite you to
NVIDIA’s GPU Technology Conference (GTC). We are taking GTC GLOBAL & ONLINE this October 5-9.


BANNER Nvidia 01

The first digital GTC in March was a huge success, drawing nearly 60,000 registrants. Now we’re taking GTC to a global scale and it’ll be the biggest one yet!

For the first time, GTC will run continuously, across all time zones, over five days starting October 5, 2020. This will give you a unique opportunity to interact with researchers, engineers, developers, and technologists from a variety of industries. You can exchange groundbreaking theories, share innovative approaches, and explore how AI will transform the way you work.

For India, we will be bringing live content - over 120+ global sessions and India sessions, starting from 6.30 PM IST every day through Oct 5th to 9th.

Full Day DLI Workshops are also being offered for India audiences starting at 12.30 PM from Oct 6th.

Visit Session Catalog to choose from hundreds of live & on-demand talks, instructor-led Deep Learning Institute (DLI) training, demos, podcasts, and Connect with the Experts sessions featuring live Q&A.

Early Bird pricing for a full Digital Conference Pass is available for just $49/-** through Friday, Sept. 25.

You can get an additional $10 off using my VIP code
NVROSHANG.

DLI training— which includes competency certification for many sessions—can be added to a Digital Conference Pass for just $99 per session.

You won’t want to miss this incredible, international event. If you have any questions or comments, let us know.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

No more guessing ... SEGGER´s Ozone & J-Link analyze hard faults on Cortex-M for you!
August 31, 2020 

During development of an embedded application, crashes of the firmware can happen. Illegal memory writes, access of unpowered peripherals, execution of invalid instructions, division by zero, ... in all cases the execution ends up in a HardFault handler. Then what? Ozone can help.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Aukua & KDPOF Team up for ISO Standard for Optical In-Vehicle Gigabit Connectivity
August 28, 2020 
Aukua Systems Inc., provider of Ethernet test and monitoring solutions, and KDPOF, leading supplier for gigabit transceivers over POF (Plastic Optical Fiber), are proud to announce the success of their technology partnership for ISO 21111 standardization. Recently, two additional sections, ISO 21111-3:2020 and ISO 21111-5:2020, of the international in-vehicle Ethernet ISO standard series 21111 have been published. "By providing their MGA2510 Ethernet Test and Monitoring Platform, Aukua Systems have supremely equipped the test setup for ISO certification, " stated Carlos Pardo, CEO and Co-founder of KDPOF.

For More Information about our Products write to:

HP: (65) 9184 7992 or 9649 7444,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER releases Floating-Point Library for RISC-V
August 28, 2020 

floating rsiv

SEGGER's stand-alone Floating-Point Library is now extended by an assembly-optimized variant for RISC-V.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

J-Link/ J-Trace

Debugging the dual-core NXP i.MX RT600 with the one and only SEGGER J-Link

New NXP i.MX RT600 trace example projects
August 27, 2020 

instruction trace

In order to be able to access both the Cortex-M33 and the HiFi4 DSP cores on the i.MX RT600 from two separate development environments, the J-Link software includes a ‘locking mechanism’, i.e. a mutual exclusion feature, which is illustrated in the following image:

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Kodiak™ Next-Generation Gen4 PCIe®/NVMe™ Protocol Analysis Solution

kodiak event2

August 24th, 2020 

Date & Time: 10 Sept 2020, Thursday, 9.30 AM (India time), 12.00 noon (Singapore time)

Planned duration: 40-45 minutes, followed by Q&A

Hosts: Experts from SerialTek, USA

Register:
https://www.esaindia.com/serialtek-webinar-kodiak.php

Join us for this webinar on 10 September 2020 and learn about PCIe/NVMe Analysis Platform with Embedded Hardware, Real-Time Protocol Processor™, Calibration-Free SI-Fi™ Probing and Automatic Equalization, Internal SSD Storage, Touchscreen LCD, and Standard PCIe Cabling

For More Information about our Products write to:

Phone: (65) 6295 1646

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


Aukua MGA2510 First to Deliver Network Impairment Emulation to Booming Automotive, Defense and Aerospace Ethernet Markets

aukua mga

August 17th, 2020 
This week Aukua Systems, Inc. (“Aukua”) announced the latest release of their MGA2510, a three-in-one hardware testing solution for high-performance Ethernet networks and applications

The V3.0 release sees the MGA2510 offering a complete suite of functionality for Network Impairment Emulation, in addition to the already supported Traffic Generation, Packet Capture, and Protocol Analysis capabilities. The MGA2510’s Network Impairment Emulation functionality included in this release makes it the first device to support 2.5Gbps and 5Gbps Ethernet, and the only platform to support Automotive Ethernet now being deployed extensively in next-generation autonomous, electric and smart vehicles.

Verifying application performance under real-world delay and congestion scenarios is critical for any Ethernet deployment including Automotive, SD-WAN, Gaming, Tactical Military Networks and Enterprise-level Cloud-based and SaaS Applications. Aukua’s Network Impairment Emulators bring those real-world conditions to the lab with controllable and reproducible results leading to significant risk reduction, higher performance and more competitive solutions. Testing with Aukua is a proven way to reduce issues and inconsistencies in real-world deployments caused by varying and dynamic network conditions.

https://www.prweb.com/releases/aukua_mga2510_first_to_deliver_

network_impairment_emulation_to_booming_automotive_defense_

and_aerospace_ethernet_markets/prweb17318677.htm

https://www.aukua.com/MGA2510/networkemulator.html

For More Information about our Products write to:

HP : (65) 9184 7992 or 9649 7444,

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More


ESS and Monsoon Announce the availability of High Voltage Power Monitor (HVPM) in India

July 10, 2020 
ESS is pleased to announce a partnership with Monsoon Inc to introduce their high voltage power monitor(HVPM) in India. The High Voltage Power Monitor (HVPM) is a 2-in-1 fine-grained power monitoring device and benchtop power supply. Fully UL, FCC, and CE certified, it is an essential tool for engineers, software developers, testers, and quality control managers in industries spanning semiconductors, medical, automotive, sensors, app-development and robotics, who want to measure precisely how much power their devices are drawing.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
msoonsales@embeddedindia.com
Websites:
www.embeddedsingapore.com

Learn More


TRACE32 provides complete support for PikeOS 5.0

June 05, 2020 
Lauterbach is pleased to announce the extension of their TRACE32® debugger to include support for SYSGO's latest release of PikeOS, version 5.0. The support contains additional features for debugging PikeOS native applications as well as APEX and POSIX guest operating systems. At the same time, even hypervised guests using PikeOS' hardware virtualization can be inspected and examined.

https://lnkd.in/gzWS5-Z

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Modular embedded solutions
May 05, 2020 
Scalable performance for the challenging situation.

Now more than ever, medical and laboratory equipment has to perform extremely well. Modular embedded solutions from TQ offer decisive advantages.

https://lnkd.in/dVt9p8i

For More Information about our Products write to:

Phone: (65) 9184 7992 or 9649 7444

Email ID (Sales) :
sales@embeddedsingapore.com

Learn More

New version V5 of SEGGER Embedded Studio IDE now available!
April 23, 2020 
The newly released Embedded Studio V5 for Arm processors comes with SEGGER’s Compiler, Linker, and Runtime and Floating-Point libraries.

All components are designed from the ground up for Embedded Systems and work seamlessly to generate extremely small programs.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

New release v4.9.4.0 of C/C++ compiler for TriCore
Added compiler support for the new AURIX TC3xx derivatives

April 23, 2020 

The main new features in this C/C++ compiler for TriCore, AURIX and AURIX 2G are:

  • Brand new Eclipse IDE, very comprehensive and user-friendly.
  • Support for new AURIX 2G variants, like TC32XX, TC33XX, TC35xx, TC36XX, TC37xx, TC38xx, TC39xx.
  • Board support packages for the new derivatives.
  • The HighTec IDE is updated to version 2.3.1.
  • Bugs fixed
  • Updated documentation by the compiler support for the new derivatives.

The new TriCore compiler version is available immediately for new license sales. Depending on the maintenance and support agreement, this new version is available to registered license holders as free update, available through the download

The new version is also available for evaluation.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Eclipse-based IDE for Host Porting, Abstraction, Simulation, Testing and Conversion

April 23, 2020 
Application Common Operating Environment (AppCOE™) is a framework of common architecture that promotes interoperability and cross-platform capabilities among systems and devices. It is built on the powerful open source Eclipse-based framework and integrates all of MapuSoft’s tools:
OS Changer®,
Cross-OS Development Platform,
OS Abstractor,
Ada Changer,
OS Simulator,
OS Version UpKit™,
RTOS Simulator,
Automated language conversion,
App/Platform Profiler™,
Linux OK™ Embedded C, C++ and Ada applications can be standardized on AppCOE to allow the applications to interoperate and run seamlessly on a single platform.

mapusoft appcoe

Application Common Operating Environment (AppCOE™) is a framework of common architecture that promotes interoperability and cross-platform capabilities among systems and devices. It is built on the powerful open source Eclipse-based framework and integrates all of MapuSoft’s tools: OS Changer®,Cross-OS Development Platform, OS Abstractor,.Ada Changer, OS Simulator, OS Version UpKit™,RTOS Simulator,Automated language conversion; App/Platform Profiler™;, Linux OK™ Embedded C, C++ and Ada applications can be standardized on AppCOE to allow the applications to interoperate and run seamlessly on a single platform.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Cross-platform freedom: SEGGER's J-Flash now available for macOS & Linux
April 23, 2020 
SEGGER J-Link now available on every popular operating system: Windows, macOS and Linux.

j flash

While the 
J-Link software and included command line tools have been cross-platform for years, the applications with Graphical User Interfaces (GUIs) have only been available on Windows. These have now been rewritten, one at a time to make the entire package cross-platform.

The concept and underlying platform has been proven for a long time in applications such as
SEGGER Embedded Studio
SystemView and the 
Ozone debugger and performance analyzer.

With this release the popular 
J-Flash application, which provides an easy to use interface for production flash programming and automation, is finally available not only for Windows, but also for Linux and macOS.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Software reuse on new operating system & hardware

April 23, 2020 

automated software

OS Changer® is a C/C++ source-level virtualization technology that allows you to easily re-use your software on another OS, while providing real-time performance. It eliminates the manual porting effort, saves money and shortens the time to market.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

PXROS-HR is SIL3 and ASIL D Safety Approved
OPTIMIZED RTOS FOR TRICORE, AURIX AND AURIX 2G

April 23, 2020 

pxros hr1

HighTec is proud to announce that our operating system now has been officially safety approved. HighTec received the certificate confirming the fitness of PXROS-HR for safety-related applications up to SIL3 (IEC61508) and ASIL-D (ISO 26262).

The certificate includes an assessment report containing the assessment results of the certification authority, TÜV-Nord Systems GmbH & Co. KG. We are really impressed with the thorough understanding of the design principles of PXROS-HR that is shown by the report.

The SIL3/ASIL-D achievement makes our real-time operating system (RTOS) the optimal and safety approved solution for non-AUTOSAR based automotive and industrial applications, including agriculture and forestry machines/equipment.

The report summarizes them as follows:

"The main principles of HR PXROS are safety, reliability, portability and expandability. To achieve these goals, PXROS-HR relies on the following principles:

  • No Periphery of the kernel function: For instance, the time-handling of the system is done in response to a predetermined tick-signal of the application.
  • General concept of resource allocation: resources are divided into objects and dedicated for certain purposes only. Preallocation can ensure that for a certain purpose, the required resources are available (e.g. memory for sending a message).
  • Separation of the interrupt system of the microkernel: the interrupt system is not influenced by the kernel; in particular, there are no interrupt locks. The interrupt system is dedicated to the application layer.
  • No lack of resources due to excessive interrupt load:
    • System calls, which result from interrupt, do not require any resources.
    • If necessary the resources will be rearranged.
  • Freedom of interference between tasks: The address ranges of tasks can be separated completely. The communication is performed through messages only.
  • Concept of the termination of functions: This ensures the correct exception handling."

Further the report characterizes our operating system as a "Safety Element out of Context" (SEooC, this terminology is taken from ISO 26262). This means that PXROS-HR as a basis of your safety critical application has not to be assessed completely from scratch but it suffices to show that it can safely be integrated into your application context.

The benefit that you draw from the use of PXROS-HR is threefold:

  • First, you can be sure, that your safety critical real-time application is build on a sound basis.
  • Second, you can save time and money because PXROS-HR as a basis of your safety critical application need not to be assessed completely from scratch but it suffices to show that it can safely be integrated into your application context.
  • Third you can safe time and money: because of the principle "Freedom of interference" you are entitled to run those parts of your application that are not relevant to safety on the same ECU as the safety critical without the extra effort of validating the non critical parts.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More


Develop Once to Deploy on Multiple Platforms with Ease

April 23, 2020 

c c appl

Cross-OS Development Platform™ is a C/C++ source-level virtualization technology that provides a robust and industry standard OS interface architecture for flexible real-time application development, while allowing the user to protect the software from being locked to one OS. This negates future porting issues because the software will support multiple operating systems and versions from the beginning. It also eliminates the risk associated with the OS selection process, since the same application can be tested on multiple platforms for comparison and won’t be tied to the chosen OS.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

Debug from home: SEGGER's J-Link Remote Server adds encryption
April 23, 2020 

segger j link

SEGGER's J-Link Remote Server is a proven way to debug remotely. It has been used for years to debug target systems, thousands of miles away, even behind firewalls. Of its many uses in the past, a particularly important one was for system bring-up when hardware availability was limited, expensive, or otherwise difficult. Today an even more important application has moved into focus.

Working from home has become a necessity for many of us. Given the ongoing changes in the working environment, it is very likely that some amount of work-from-home time will become not just more common but will be "the new normal".

It is not only impractical for developers to carry hardware home, with 
J-Link Remote Server it is also unnecessary. Developers can simply connect from home and use any tool that supports 
J-Link. The J-Link operates exactly the same as if it were sitting right on the developer's desk. J-Link Remote Server was first convenient, then very useful, and is now on its way to becoming indispensable.

Paired with authenticated access to the J-Link Remote Server, and the encrypted communication tunnel between software and probe, remote access is another rock-solid debug option for the J-Link based on the proven algorithms of 
emCrypt. The authentication uses challenge-response methods to ensure the password is never visible on the wire. The end-to-end encryption of the debug stream ensures that the application can be securely transferred via wire.

The J-Link Remote Server can be used at no cost with any J-Link model, including base models with only USB interface. The software is included in the "
J-Link Software and Documentation Package" that comes with every model J-Link or 
J-Trace.

For More Information about our Products write to:

Phone: (65) 6295 1646,

Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

Learn More

SEGGER continues to strengthen its position in relation to the RISC-V instruction set architecture.
March 30, 2020 

SEGGER continues to strengthen its position in relation to the RISC-V instruction set architecture.

SEGGER announces comprehensive support for SiFive Insight debug/trace platform.

sifi

Learn More

Diamond Systems Floyd, Stevie, Elton carrier boards for Nvidia Jetson, Xavier, COM Express and more
March 27, 2020 

Diamond Systems a leading global provider for rugged, I/O-rich embedded computing solutions introduced new carrier board solutions for NVIDIA Jetson Modules and new PC/104 solutions at Embedded World 2020.

Learn More

XJAnalyser
March 27, 2020 

XJAnalyser lets you quickly find open- and short-circuit faults on your prototype. Claim one of 150 XJAnalyser test tools worth $7,900 each that XJTAG is giving away for free. Learn more at
https://bit.ly/3doWhqC

Relyum extends its TSN offer with new products
March 13, 2020 

Relyum: Aiming to offer the most complete TSN solution to its customers, Relyum has released new products and functionalities for covering all the needs of Time-Sensitive Networking.

rely mpsoc front e1584002045701

https://lnkd.in/fzju9Ws

Learn More

Diamond Systems Elton Carrier Board with Nvidia's Jetson AGX Xavier
March, 2020 

Diamond's ELTON carrier board solution for the NVIDIA Jetson AGX Xavier module is getting attention by engineers implementing high performance computing and AI applications in mobile and harsh environments.


Learn More

ges logo1

Goplam Embedded Systems Pte Ltd.,

Joins the BlackBerry QNX Distributor

and Value-Added Integrator Program

blackberry qnx logo


GES to support design and development of secure, mission-critical embedded solutions using BlackBerry QNX technologies.


Singapore May 15, 2019

Gopalam Embedded Systems (GES), a leading provider of hardware and software development solutions for embedded real-time systems, today announced that it has joined the BlackBerry QNX Distributor and Value-Added Integrator Program, and will offer BlackBerry QNX software and services to its broad embedded customer base in the ASEAN region.
Under the agreement, GES will resell BlackBerry QNX products and services, including the popular
QNX Neutrino® RTOS,
QNX OS for Safety,
QNX OS for Medical and various other QNX offerings. This combined with its technical expertise and competency in Embedded Systems Tools, RTOS and Middleware will enable GES to build upon BlackBerry QNX’s embedded technologies, provide integration services and design, and develop safety critical solutions for GES’ customers in the ASEAN region.


Read More

Contact: Phone: (+65) - 62951646,

H/P: (+65) 9184 7992/9649 7444

Email:
sales@embeddedsingapore.com
Web:
www.embeddedsingapore.com

ges logo1

Goplam Embedded Systems Pte Ltd.,

is now member of

Singapore Industrial Automation Association

siaa logo


May 6, 2019 

About Singapore Industrial Automation Association:

Incorporated since 1982, Singapore Industrial Automation Association (SIAA) is a professional association for companies and professionals in the Automation, Internet-of-Things (IoT) and Robotics sectors. To date, SIAA has about 500 active member companies and professionals, representing different industry verticals such as smart cities, buildings, logistics, retail, transportation, tourism, healthcare, and manufacturing.
SIAA plays a crucial role in galvanizing the Automation, IoT and Robotics business community, through its extensive line-up of highly-valued programs and events.

Goplam Embedded Systems Pte Ltd., is member of SIAA :
https://www.siaa.org/cos/o.x?c=/wbn/pagetree&func=view&rid=1061261
Contact: Phone: (+65) - 62951646,

H/P: (+65) 9184 7992/9649 7444

Email:
sales@embeddedsingapore.com
Web:
www.embeddedsingapore.com

ges logo1

Goplam Embedded Systems Pte Ltd.,

is now member of

Singapore Semiconductor Industry Association

ssia logo


May 6, 2019 

About Singapore Semiconductor Industry Association

Singapore Semiconductor Industry Association (SSIA) is the voice of Singapore’s semiconductor industry and is committed to support this important sector in Singapore in order to facilitate substantial growth of the whole semiconductor economy of the country. SSIA brings together industry players, academia, and government agencies. Major activities focus on industry and talent outreach and continuing education, as well as to collectively address industry needs. SSIA is a platform for members to reach out to new business opportunities, industry alliances, and partners. It provides networking and relationship opportunities beyond the boundaries of Singapore. SSIA members today include companies and organizations throughout all parts of the complex and comprehensive value chain – IC design companies, Manufacturers, Fabless companies, Equipment suppliers, Photovoltaic and LED companies, EDA and material suppliers. Training and service providers, IP companies, Research institutes and Academia, as well as individual members.
Goplam Embedded Systems Pte Ltd., is member of SSIA :
https://ssia.org.sg/ssia-members/
Contact: Phone: (+65) - 62951646,

H/P: (+65) 9184 7992/9649 7444

Email:
sales@embeddedsingapore.com
Web:
www.embeddedsingapore.com

ges logo1

Gopalam Embedded Systems Participating as exhibitors in

Picture1

Vietnam Industrial and Manufacturing Fair-2019
12-14 June, 2019 
BinhDuong Convention and Exhibition Center,
No 1, Le Loi Street, BinhDuong New City, BinhDuong, Vietnam

Visit our Booth # A45

Our Products on Display:

Hardware & Software Development Tools for Industrial Automation Applications



Register



Apr 24, 2019 

About VIMF 2019

With 8 successful editions to date,
Vietnam Industrial & Manufacturing Fair ( VIMF) is the ideal platform for international/ local manufacturers and suppliers to launch new products, meet targeted buyers, appoint agents and distributors, generate new business delegates & visitors, govt. authorities, industrial associations, international trade consulates, etc and establish business networks in Vietnam market. VIMF 2019 will be staging the specialized high profile event on technologies, equipment, machines & tools, systems, industry materials, and engineering services, for manufacturing, metalworking and subcontracting industries.
Vietnam Industrial & Manufacturing Fair 2019 (VIMF 2019) are the compilation of;
  • Factory Automation, Process Automation, Industrial Automation
  • Materials Handling, Automation/ Logistics Transportation
  • Equipment & Machinery, Pumps & Valves
  • Metalworking, Precision Engineering & Subcontract Manufacturing
  • Plastics Processing and Materials
  • Printing & Packaging
  • Woodworking & Furniture Manufacturing

For More Information about our Products writo:
Phone: (65) 6295 1646, Email ID (Sales):
sales@embeddedsingapore.com
Websites:
www.embeddedsingapore.com

PEAK-System with innovations at embedded world 2019
Febrauary 14, 2019 
News EmbeddedWorld2019 Preview

PEAK-System, a company specializing in classical CAN and modern CAN FD, will present its latest products at embedded world 2019. "Like every year before, we as a German manufacturer and provider are proud to be able to prove our long-standing know-how again", so the managing director Uwe Wilhelm.
Exhibition visitors can take a look at the PCAN-MiniDiag FD, which was released at the end of January 2019, and the new PCAN-MicroMod FD product series, which will be released after the exhibition. The plug-in module PCAN-MicroMod FD, the development board PCAN-MicroMod FD Evaluation Board, and the PCAN-MicroMod FD motherboards Analog 1, Digital 1, and Digital 2 will be available. In addition, the first product of a CANopen series will be shown, which will be launched in the second half of the year.
Access to CAN FD buses via the LAN interface of a computer is to be made possible by the PCAN-Gateway FD DR at the end of 2019. A first prototype of this Linux-based module in a DIN rail housing will also be shown.
Last but not least, exhibition visitors can take a closer look at the PCAN-Router Pro FD announced for the third quarter, which is equipped with six CAN FD channels, I/Os, and data logger and can be configured with Windows software.
PEAK-System can be found at embedded world 2019 in hall 1, booth 483. The exhibition will take place from February 26th to 28th in Nuremberg, Germany. It is an important annual event for professionals from all over the world to find out about the latest embedded technologies for hardware, software, and tools.
Website of the exhibition:
www.embedded-world.de

Read More

The German company PEAK-System has published the handheld device PCAN-MiniDiag FD for the basic diagnosis and fast checking of CAN and CAN FD buses
 

quick can

The German company PEAK-System has published the handheld device PCAN-MiniDiag FD for the basic diagnosis and fast checking of CAN and CAN FD buses. The battery-powered device has functions which show, for example, the termination, bus load, message and error counters as well as the levels at the CAN connection. In particular, for the first time, users can access any CAN network in a matter of seconds with the innovative transmission rate detection. More precisely, bit timing measurements are used to determine the nominal bit rate for CAN and the data bit rate for CAN FD.
The PCAN-MiniDiag FD can easily be operated with one hand due to its compact size and fits into any conventional trouser or jacket pocket. The device is suitable for service technicians and developers who want to quickly access unknown CAN networks in vehicles, machines, or industrial facilities and perform simple diagnostics. The PCAN-MiniDiag FD has a D-Sub connector, an OLED display, a membrane keyboard with four keys, and a housing with increased IP42 ingress protection.

Read More

Aukua delivers 3-in-1 Automotive Ethernet testing solution!
 

Aukua Systems 3-in-1 Automotive Ethernet testing solution delivers three powerful tools in one platform!

Network Impairment Emulation: see how delay, impairments and bandwidth affect automotive systems, applications and security

Inline Packet Capture and Protocol Analyzer: capture packets, monitor traffic in real-time, and troubleshoot hard to find problems

Traffic Generator: verify system integrity, throughput performance and measure system latency

Aukua is working to help Automotive semiconductor companies, Tier 1 suppliers and OEM Manufacturers leverage Automotive Ethernet so they can rapidly innovate with confidence and deliver new in-vehicle services and infortainment features, while improving safety with new advanced driver assistance systems (ADAS).

Read More

Peak-System Technik GmbH
 

can2

PEAK-SYSTEM is expanding their CAN FD product line and releasing the brand new PCAN-M.2 Four Channel card for M.2 interfaces. Thanks to the mounted expansion board on the main board, four CAN FD channels are available for computers. Each CAN FD channel can transmit a maximum of 64 data bytes of a CAN FD frame at bit rates of 20 kbit/s up to 12 Mbit/s. Each channel is also galvanically isolated up to 300 volts and can be terminated.
The card can be used on any motherboard size from Mini-ITX to E-ATX. Thus, the plug-in card is suitable for desktop and industrial PC cases of various sizes. Especially for embedded systems, such as those found in motor vehicles, railways, and aircraft, the CAN FD interface is ideal due to its size and compactness.
Device drivers are available for the operating systems Windows (10, 8.1 and 7) and Linux.
For further information, just follow this link:
https://lnkd.in/d3wEfrT

Read More

USB adapter for LIN with master/slave functionality
May 31, 2018 
pcan tools

PEAK-System launched a compact USB adapter called PLIN-USB for connecting a computer to a LIN network. The LIN adapter is intended for service technicians for diagnosis of LIN buses and for developers of vehicle networks. The adapter supports the LIN protocol according to ISO 17987 and meets all LIN specifications up to version 2.2. The LIN interface can be used in master or slave mode.
For more details write to
pcantool@embeddedindia.com

Read More

Aukua's MGA2510 is the first and only traffic generator to support Energy Efficient Ethernet (EEE) or IEEE 802.3az operation!
March 16, 2018 - June 30, 2018 
aukua news

It is now possible to validate EEE operations, characterize latency and throughput performance and inject impairments for negative and functional testing all directly over a EEE enabled link.
This new feature is supported for 1000BASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T.
Please contact
aukuasales@esaindia.com or call +91-9886080011 to schedule a demo today!


Uwe Wilhelm, CEO of Peak-System at Embedded World 2018 - PEAK-System PCAN-PCI/104-Express FD Four Channel

May, 2018 

Read More


WIZnet IOT CONTEST

March 16, 2018 - June 30, 2018 
wiznet iot
For Registration Visit:
www.hackster.io/contests/wiznet


Serial to Ethernet, StablE" is an international project contest for developers worldwide, powered by 
WIZnet. This contest gives developers an opportunity to showcase their skills in IoT innovation and competency.
We invite all contestants to explore WIZnet's new serial to Ethernet device, WIZ750SR. Any idea or project submission based on WIZ750SR will be accepted, because every project will enhance the functions of WIZ750SR and empower its usefulness.
For contestants, WIZnet provides the standard firmware which supports configuration of the device by Ethernet and data exchange between serial and Ethernet under plenty of options. Contestants had better use the basic software framework and add only their idea on it. Of course, they can design their own complete code from the beginning just using WIZ750SR as a HW platform. It is recommended to use any kind of sensors, actuators or any other devices additionally to differentiate your project from others.
Submit your ideas during the first phase of the contest, May 16 ~ April 20, for a chance to win a free WIZ750SR board to build your project and win cash prizes!
For Registration Visit:
www.hackster.io/contests/wiznet
For More Information about the contest, write to:
Email:
sales@embeddedindia.com
Phone: 080-6764 8888

Website:
www.embeddedindia.com;
www.esaindia.com


Tesla owners are required to have the Peak-System’s PCAN-USB adapter..



Tesla owners are required to have the PCAN-USB adapter and Tesla’s Event Data Recorder (EDR) Retrieval Program to generate a PDF report outlining the findings from their electric cars’ data recorder.
Tesla is now allowing owners of its vehicles to access their cars’ Event Data Recorder (EDR), commonly known as the ‘black box’ of autos, through a set of licensed tools and software.
As noted by Tesla on its official help page for its EDR user guide, all of the company’s vehicles save for the original Roadster are equipped with an Event Data Recorder. The recording devices are only activated once the vehicle senses a non-trivial physical occurrence in the vehicle. Thus, during normal driving conditions, the EDR is deactivated.
In the event that data logs from the EDR need to be accessed, however, Tesla’s new set of proprietary tools and software can retrieve data from the vehicle’s black box. The following hardware is required to gain access to the data to the Model S, X, and 3’s EDR.
  • A Windows computer (Mac OSX and Linux are not supported)
  • A PCAN-USB, which is a USB-to-CAN adapter manufactured by Peak System
  • The appropriate Tesla Model S, X, or 3 cable from the EDR Retrieval Hardware Kit

Read More

ges logo
logo solid altair cropped

Participating as exhibitors in

INTERNATIONAL EXHIBITION & CONFERENCE ON THE INTERNET OF THINGS
iotasia

Visit our Booth # A37, Singapore Expo (Hall 3) 1 Expo Drive, Singapore 486150



Register

Goplam Embedded Systems, along with partners SolidThinking, an Altair company, are participating in the IoT Asia 2018. SolidThinking products ‘EMBED, ACTIVATE, COMPOSE’ will be showcased and demonstrated. For more details on the products on display, visit



www.embeddedsingapore.com/products/model-based-system-design/solidthinking



mbd.altair.com/

IoT Asia’s aim is to provide a neutral platform for technology influencers to discuss the latest trends and challenges within the industry. For the past 4 years, IoT Asia has been at the forefront of bringing global collaboration and partnership opportunities to governments, businesses and communities in Asia. IoT Asia is an award winning stage that brings together technology heads, design architects, solution architects, engineers, academic institutions, investors and start-ups to assess the latest trends and partnership models in Asia. Featuring a 6,000 sqm exhibition, multi-track thought provoking conferences and community-driven seminars, IoT Asia 2018 will put the spotlight on the following key areas critical to the development of IoT in Asia: Smart Cities, Industrial IoT, IoT Data Analytics, Enablers.
For more information about SolidThinking products contact:


Gopalam Embedded Systems Pte Ltd,
Phone: (65) 6295 1646, HP: (65) 9184 7992 or 9649 7444
Email ID (Sales):
sales@embeddedsingapore.com
Email ID (Support):
support@embeddedsingapore.com

Read More

Webinar on Verifying RTOS Applications using Deep Insight Analysis-Sept 27th

WEBINAR with Jacob Beningo
Time-to-market and reliable products - sounds like contradictive requirements. You can master both by applying the right tools and techniques. Very much dependent on the right concept - selecting the right RTOS and the use of capable tools - keeps you focusing on your application.

GES announces its partnership with Artila. ESS aspires to add force to Artila’s mission to empower device manufactures and system integrators to realize pervasive computing by providing quality products to help our customers incorporate Ethernet connectivity, Web services and embedded computing into their products and solutions, in Singapore, Malaysia and other ASEAN regions.

Read More

GES announces its partnership with MicroMax Computer Intelligence. MicroMax is an engineering company, designing specialized computer systems for mission critical applications, with a client base that includes the transportation industry (rail, marine and air), various industrial and manufacturing enterprises as well as financial and federal and municipal agencies. MicroMax systems are excellent for harsh scenarios such as train or marine use, limited-sheltered outdoor applications in heat and cold, and tough industrial environments with dust, dirt, and other contaminants. With this partnership GES hopes to serve customers build rugged customizable industrial systems for tough environment, in Singapore, Malaysia and other ASEAN regions.

Read More

sales enquiry button